Rabbit Hutch Roof Plans

This step by step woodworking project is about rabbit hutch roof plans free. This is PART 2 of the project, where I show you how to build the lid and the front doors. This rabbit hutch is a nice addition to any backyard. My plans come with step by step instructions and you can easily adjust all the dimensions to suit your needs. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans in the Shop.

Made from this plan

Building a rabbit hutch roof

building-a-rabbit-house

Materials

E – 1 piece of 3/4″ plywood – 17 1/4″x21″ long PARTITION
F – 2 pieces of 1×4 lumber – 26″ long, 3 pieces – 41″ long LID
G – 1 piece of 3/4″ plywood – 26″x48″ long ROOF
H – 2 pieces of 2×2 lumber – 32 3/4″ long, 4 pieces – 5 1/4″ long LADDER
I – hardware cloth WIRE
J – 2 pieces of 2×2 lumber – 12 3/4″ long, 2 pieces – 19 3/4″ long, 1 piece of 1/2″ plywood – 15 3/4″x19 3/4″ long 2xDOOR

2 pieces of 1×4 lumber – 8′
3 piece of 2×2 lumber – 8′
1 piece of T1-11 – 4’x4′
1 piece of 3/4″ plywood – 4’x8′
15 sq ft of tar paper, 15 sq ft of asphalt shingles
hardware cloth
hinges, latches
2 1/2″ screws, 1 5/8″ screws
1 1/2″ brad nails
wood filler , wood glue, stain/paint

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Time

One Day

Side-panels

First of all, attach the T1-11 siding panels to the sides of the hutch. Mark the cut lines to the panels and get the job done with a jigsaw. Smooth the edges with attention and use 1 1/2″ brad nails to secure the siding into place tight.

Back-wall-panel

Fit a piece of T1-11 siding to the back of the rabbit hutch as well. Align the sheets with attention and lock it into place with 1 1/2″ brad nails.

Building-the-partition

Build the partition for the rabbit hutch from 3/4″ plywood. Mark the cut lines on the diagram and then get the job done with a jigsaw.

Fitting-the-partition

Drill pocket holes along the sides of the partition and secure it to the supports with 1 1/4″ screws.

Building-the-ladder

Build the ladder from 2×2 lumber. Cut the components at the right dimensions and lock the components together with 2 1/2″ screws. Drill pilot holes through the long supports and insert the screws into the steps.

Fitting-the-ladder-to-the-hutch

Fit the ladder to the rabbit hutch and secure it into place with screws.

Building-the-doors

Build the doors from T1-11 siding and 2×2 trims. Lock the trims together with screws and then attach the T1-11 siding with 1 1/2″ brad nails. Add glue to the joints, as well.

Fitting-the-doors

Fit the doors to the opening and secure them into place with hinges. In addition, install latches so you lock the doors into place tightly.

Building-the-roof-frame

Use 1×4 lumber for the frame of the lid. Drill pocket holes and then lock the components together with 1 1/4″ screws.

Fitting-the-roof-sheet

Attach a piece of 3/4″ plywood to the top of the roof. Drill pilot holes and insert 1 1/4″ screws to lock the sheets to the frame. Use hinges to secure the lid to the back wall.

Fitting-the-roofing

Cover the roof with tar paper and then install the asphalt shingles. Fit drip edges to the roof of the rabbit hutch.

Rabbit-hutch-top-lid-and-front-doors

As you can easily notice in the plans, you have a super easy access to the inside of the hutch. The lid can be easily opened and closed, so you can clean the floor in a professional manner. In addition, the two front doors are ideal for you to get the rabbits in and out the cage.

Rabbit-hutch-plans

Check out my other outdoor projects and plans. If you like my project, don’t forget to SHARE it on Facebook and Pinterest. In addition, I recommend you to take a look over PART 1 of the project, so you learn how to build the frame of the rabbit hutch.

Thank you for reading our project about rabbit hutch roof plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

<< Previous | Next >>

PRINT PLAN