Shed Door with Windows Plans

 

This step by step diy woodworking project is about how to build shed doors with windows. These simple doors features a sturdy frame with windows, so you can have plenty of light inside of the shed. Remember that you need to read the local building codes before starting the construction, so you comply with the legal requirements. See my other shed plans HERE ^[1].

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting.

 

 

Made from this plan

^[2]

 

 

4×12 Shed Door Plans

 

Materials

• M – 2 pieces of 2×4 lumber – 76″ long, 1 piece – 79″ long JAMBS
• N – 4 pieces of 2×4 lumber – 69″ long, 4 pieces – 36″ long, 2 pieces – 29″ long, 1 piece of T1-11 siding – 36″x76″ long, 1 piece of 1×2 lumber – 22″ long, 2 pieces – 13 3/4″ long, 2 pieces of 1/2″ polycarbonate – 24″x31″ long 2xDOOR

---

• 3 pieces of 2×4 lumber – 8 ft
• 14 pieces of 1×4 lumber – 8 ft
• 1 piece of 1×2 lumber – 10 ft
• 50 pieces of 3 1/2″ screws
• 50 pieces of 1 1/4″ pocket screws
• 100 pieces of 1 1/4″ screws
• 2″ nails
• shed hinges and latch
• wood filler , wood glue, stain/paint

Tools

• Safety gloves, glasses
• Miter saw, jigsaw
• Chalk line, tape measure, spirit level, carpentry pencil
• Drill machinery and drill bits

Time

• One Week

 

 

Make sure you follow me on YOUTUBE ^[3] and Facebook ^[4] to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest ^[5] to get many ideas for your backyard from all the internet! See how you can Support Me ^[6] with no extra costs to you.

 

 

Step 9: Building a shed door with window

The first step of the project is to build the jambs for the front door. Cut the components from 2×4 lumber and then lock them into place with 3 1/2″ screws. Align the edges with attention and make sure the corners are square.

Build the door from from 1×4 lumber, using pocket holes and 1 1/4″ screws. Align the edges with attention and make sure the corners are square. Add glue to the joints and make sure the edges are aligned.

Attach the T1-11 siding sheet to the frame with 1 1/4″ screws and glue. Align the edges flush and attach the polycarbonate panels into the slots, as shown in the diagram.

Afterwards, attach another frame to the door panel and lock it into place with 2″ nails and glue. Align the edges flush and install the 1×2 trims to the window panels (secure them into place with glue).

Fit the double doors to the opening and then secure them to the jambs with hinges. In addition, fit the latch to keep the doors together tightly.

Smooth the surface with sandpaper. Apply a few coats of paint or stain over the components, to protect them from decay and to enhance the look of the shed. Don’t forget to take a look over PART 1 ^[7] and PART 2 ^[8] of the project so you learn how to build the roof and the front door for the storage shed. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE ^[2]. In addition, take a look over the rest of my DIY projects HERE ^[9].

 

 

Thank you for reading our project about 4×12 shed door plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

 

<< Previous ^[8]

 

 

EXPLORE MORE IDEAS: