10×10 Lean to Shed Roof Plans

 

This step by step woodworking project is about free 10×10 lean to shed roof plans. This is PART 2 of the garden lean to shed project where I show you how to frame the roof and how to build the front door. The lean to roof is the ideal choice if you want to build it near the property line. The double shed doors will give you a quick and wide access to the interior of the shed. See my other DIY projects HERE ^[1].

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE ^[2].

 

 

Made from this plan

^[3]

 

 

10×10 Lean to Shed Roof Plans

 

Materials

• G – 2 pieces of T1-11 siding – 48″x113 1/4″ long, 1 piece – 24″x91 1/2″ long, 2 pieces – 48″x116 1/2″ long, 1 piece – 24″x116 1/2″ long, 2 pieces – 48″x120″ long, 2 pieces – 48″x11″ long, 2 pieces – 48″x1003/4″ long SIDING
• H – 9 pieces of 2×6 lumber – 144″ long RAFTERS
• I – 2 pieces of 2×6 lumber – 144″ long, 5 pieces – 5 1/2″ long 2xOVERHANG
• J – 2 pieces – 9 1/4″x96″ long, 2 pieces – 9 1/4″x48″ long, 3 pieces – 48″x96″ long, 3 pieces – 24″x48″ long ROOF
• K – 2 pieces of 1×8 lumber – 144″ long, 2 pieces – 141 1/4″ long TRIMS
• L – 150 sq ft of tar paper, 150 sq ft of asphalt shingles ROOFING
• M – 2 pieces of 2×4 lumber – 80″ long, 1 piece – 43″ long JAMBS
• N – 1 piece of T1-11 siding – 36″x80″ long, 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 73″ long, 1 piece – 29″ long DOOR
• O – 4 pieces of 1×4 lumber – 116″ long, 2 pieces – 90 1/2″ long, 2 pieces – 89 3/4″ long TRIMS

---

• 14 pieces of 2×6 lumber – 12 ft
• 3 pieces of T1-11 58″ – 4’x8′
• 8 pieces of T1-11 58″ – 4’x10′
• 5 pieces of 1/2″ plywood – 4’x8′
• 6 pieces of 2×4 lumber – 8 ft
• 4 pieces of 1×8 lumber – 12 ft
• 4 pieces of 1×4 lumber – 10 ft
• 4 pieces of 1×4 lumber – 8 ft
• 150 sq ft of tar paper, 150 sq ft of asphalt shingles
• hinges & latch
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 4d nails, 6d nails
• wood filler , wood glue, stain/paint
• 24″x36″ window

Tools

• Safety gloves, glasses
• Miter saw, jigsaw
• Chalk line, tape measure, spirit level, carpentry pencil
• Drill machinery and drill bits

Time

• One Day

 

 

How to build a lean to shed roof for a 10×10 shed

Use 5/8″ T1-11 siding sheets for the exterior of the shed. Attach the panels to the exterior of the shed and align the edges flush. Insert 6d nails to secure the panels to the framing of the shed. Use a saw to make the cuts around the openings.

Attach the sheets to the back of the shed. Align the edges flush and leave no gaps between the sheets. Insert 6d nails every 8″ along the framing.

Build the rafters for the lean to roof using 2×6 lumber. Mark the cut lines on the slats and get the job done with a circular saw. The birdsmouth cuts are needed so you can fit the rafters into place tightly.

Fit the rafters every 16″ on center and align the edges with attention. Drill pilot holes and insert 3 1/2″ screws so you can secure the rafters to the top plates.

Use T1-11 siding for the side walls for the shed. Make the cuts to the sheets and then align them into place. Use 6-8d nails, every 8″ along the framing.

Build the overhangs for the sides of the shed using 2x6s. Drill pilot holes through the beams and insert 3 1/2″ screws into the blockings. It is really easy to to adjust the size of the overhangs to suit your needs.

Fit the overhangs to the sides of the shed and align the edges flush. Drill pilot holes through the overhangs and insert 3 1/2″ screws to lock them into place tightly.

Cut and fit the 1/2″ plywood sheets to the top of the shed roof. Align the edges flush and insert 1 5/8″ screws, every 8″ along the rafters.

Fit the 1×8 trims to the sides of the shed. Align the edges flush and insert 2″ nails to lock them into place tightly.

Fit the 1×8 trims to the front of the shed roof. Lock them into place tightly with 2″ nails.

You could fit asphalt shingles to protect the shed, as it is a straight forward solution. Therefore, install roofing felt over the roofing sheets, making sure the strips overlap at least 2″″. Secure the tar paper to the plywood sheets with roofing staples. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under. Place a starting course at the bottom of the roof, before installing the asphalt shingles. Always read the manufacturing instructions before starting the installation, as there are several aspects that differ.

Smart Tip: The first course should star with a 3 tab shingle, the second course with a  2 1/2 tab , the third course with a 2 tab, the forth course with a 1 1/2 tab, the fifth course with a 1 tab, the sixth course with a 1/2 tab. Repeat the process from the beginning, starting with the seventh course. Don’t forget that the shingles should overhang from the drip edge about a 1/4″. In addition, secure the asphalt shingles to the roof decking with tacks.

Fit 2×4 jambs around the door opening. Align the boards with attention and then lock them into place tightly with 2 1/2″ screws.

Build the door for the lean to shed from 2×4 lumber and T1-11 siding. First, you need to make the frame for the door from 2×4 lumber. Drill pocket holes and assemble the door frames together tightly with 2 1/2″ screws. Make sure the corners are square for a neat result. Attach the T1-11 siding that you have cut out in the previous steps and lay them over the door frames. Use 2″ nails to secure the panels to the frames tightly.

Fit the door to the front of the garden shed. Align the edges with attention and lock them to the jambs with hinges. Attach a latch to lock the door.

Use 1×4 lumber for the exterior corner trims. Make the angle cuts and then attach them into place with 2″ nails.

Fit the window to the opening and then you can attach 1×4 trims to enhance the look of the shed.

Last but not least, you need to take care of the finishing touches. Therefore, fill the holes with wood putty and then smooth the surface with sandpaper. Apply a few coats of paint or stain over the components to enhance the look of the shed and to protect the components from decay.

This 10×10 shed is a cute square shelter with a lean to roof. The shed features a door to the front and a window, so you can have plenty of light inside the shed. Check out PART 1 ^[4] of the project for free shed frame plans. See all my SHED PLANS ^[5], as well, as I have lots of designs that come in many sizes.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. You can also fit 1×4 decorative trims to the corners of the shed, so you enhance its look.

 

 

Thank you for reading our project about free 10×10 lean to shed roof plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

 

 

 

 

EXPLORE MORE IDEAS: