Home Animals Large Chicken Coop Roof Plans

Large Chicken Coop Roof Plans

by Jack Sander
0 comments 592 views 5 minutes read

 

This step by step woodworking project is about free large chicken coop roof plans. This is PART 2 of the 8×10 chicken coop project, where I show you how to build the gable roof. You can get the job done really easily, if you use trusses and follow my instructions and diagrams. Moreover, you need to take a look over the rest of my coop plans and projects HERE. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE.

 

 

Made from this plan

Add-Image

 

 

Large Chicken Coop Roof Plans

Building a large chicken coop

Building a large chicken coop

 

Materials

  • G – 4 pieces of T1-11 siding – 26 1/4″x48″ long SIDING
  • H – 2 pieces of 2×4 lumber – 68″ long, 1 piece – 96″long, 1 piece – 19″ long 6xTRUSS
  • I – 2 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 24″x48″ long, 2 pieces – 20″x96″ long, 2 pieces – 20″x24″ long ROOF SHEETS
  • J – 4 pieces of 2×4 lumber – 68″ long OVERHNAGS
  • J – 180 sq ft of tar paper, 180 sq ft of asphalt shingles ROOFING
  • K – 4 pieces of 1×4 lumber – 68″ long, 2 pieces of 1×6 lumber – 127″ long, 4 pieces – 69″ long TRIMS

  • 28 pieces of 2×4 lumber – 8′
  • 4 pieces of 1×6 lumber – 8′
  • 2 pieces of 1×6 lumber – 12′
  • 4 pieces of 3/4″ plywood – 48″x96″
  • 2 pieces of T1-11 – 48″x96″
  • rafter ties
  • 8d nails, 2 1/2″ screws, 3 1/2″ screws
  • wood filler , wood glue, stain/paint

Tools

  • Safety gloves, glasses
  • Miter saw, jigsaw
  • Chalk line, tape measure, spirit level, carpentry pencil
  • Drill machinery and drill bits

Time

  • One Day

 

 

Building a gable chicken coop roof

Rafters for large chicken coop

Rafters for large chicken coop

 

Fitting the bottom chord

Fitting the bottom chord

 

Middle support

Middle support

First of all, you need to assemble the trusses for the chicken coop roof. Cut the components from 2×4 lumber and lay them on a level surface. Leave no gaps between the components for a professional result. Use metal plates to reinforce the joints.

Fitting the trusses

Fitting the trusses

Fit the trusses to the top of the chicken coop, every 24″ on center. Use rafter ties to lock the trusses into place tightly. Use a spirit level to make sure the trusses are perfectly vertical.

Fitting the gable ends

Fitting the gable ends

Fit T1-11 siding sheets to the gable ends of the chicken coop. Mark the cut lines on the sheets and then get the job done with a saw. Smooth the edges, align the edges and leave no gaps between the sheets. Use 6-8d nails to lock the panels into place tightly, every 8″ along the framing.

Fitting the overhangs

Fitting the overhangs

Fit 2×4 overhangs to the sides of the roof. Cut the slats at the right size and angle and then lock them into place with 2 1/2″ screws.

Fitting the roofing sheets

Fitting the roofing sheets

Fit 3/4″ plywood sheets to the top of the roof. Align the edges flush and leave no gaps between the sheets. Use 1 5/8″ screws to lock the sheets into place, every 8″ along the rafters.

Side roof trims

Side roof trims

Fit 1×6 trims to the front and to the back of the roof. Align the edges flush and use 2″ nails to lock the trims into place tightly.

Roof side trims

Roof side trims

Fit 1×6 trims to the sides of the chicken coop roof. Make the angle cuts to the trims and then lock them into place tightly with 2″ nails.

Fitting the roofing

Fitting the roofing

You could fit asphalt shingles to protect the shed, as it is a straight forward solution. Therefore, install roofing felt over the roofing sheets, making sure the strips overlap at least 2″. Secure the tar paper to the plywood sheets with roofing staples. Fit the side drip edges over the roofing felt, while the bottom drip edges should be fit under. Place a starting course at the bottom of the roof, before installing the asphalt shingles. Always read the manufacturing instructions before starting the installation, as there are several aspects that differ.

Smart Tip: The first course should star with a 3 tab shingle, the second course with a  2 1/2 tab , the third course with a 2 tab, the forth course with a 1 1/2 tab, the fifth course with a 1 tab, the sixth course with a 1/2 tab. Repeat the process from the beginning, starting with the seventh course. Don’t forget that the shingles should overhang from the drip edge about a 1/4″. In addition, secure the asphalt shingles to the roof decking with tacks.

Large chicken coop plans

Large chicken coop plans

I have designed this large chicken coop so you can raise up to 20 chickens. Remember to check out PART 1 and PART 3 of the chicken coop project, so you learn how to build the frame and the nesting boxes. See all my COOP PLANS, as well, as I have lots of designs that come in many sizes.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE. In addition, take a look over the rest of my DIY projects HERE.

 

 

Thank you for reading our project about free large chicken coop roof plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

 

<< Previous  |  Next >>

 

 

<b>PRINT PLAN<b> PRINT PLAN

EXPLORE MORE IDEAS:

 

You may also like

Leave a Comment

* By using this form you agree with the storage and handling of your data by this website.