Bike Shed Door Plans

This step by step diy woodworking project is about bike shed plans. This is PART 3 of the bike shed, where I show you how to build the small front door. This shed is easy to build and it can accommodate a few large bikes and a few small bikes, as well as skates and rollers. Remember that you need to read the local building codes before starting the construction, so you comply with the legal requirements. See my other shed plans HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE.

Made from this plan

Building a bike shed

Materials

K – 2 pieces of 1×4 lumber – 70″ long, 1 piece – 42 1/4″ long JAMBS
L – 2 pieces of 1×4 lumber – 63″ long, 2 pieces – 35″ long, 1 piece – 28″ long, 1 piece of T1-11 siding – 35″x70″ long DOOR

6 pieces of 1×4 lumber – 8′
2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
50 1 1/4″ screws
4d nails, 16d nails, 6d nails
shed hinges and latch
wood filler , wood glue, stain/paint

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Time

- One Week

How to build a 4×8 bike shed door

Door trims

The first step of the project is to build the jambs for the front door. Cut the components from 1×4 lumber and then lock them into place with 2″ nails. Align the edges with attention and make sure the corners are square.

Building the door

Build the frame for the door using 1x4s. Drill pocket holes at both ends of the vertical supports and at both ends of the horizontal support. Align the edges making sure the corners are square, and insert 1 1/4″ screws. Attach the T1-11 siding panel to the door frame with 1 1/4″ screws.

Fitting the door

Fit the door to the opening and then secure it to the jambs with hinges. Make sure the door opens and closes easily and then install a latch.

Bike Shed Plans

Last but not least, you need to take care of the finishing touches. Fill the holes with wood putty and then smooth the surface with sandpaper. Apply a few coats of paint or stain over the components, to protect them from decay and to enhance the look of the shed.

This is a very narrow shed, making it ideal for a small backyard. Don’t forget to take a look over PART 1 and PART 2 of the project so you learn how to build the roof and the front door for the storage shed. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Thank you for reading our project about free bike shed door plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

<< Previous | Next >>

PRINT PLAN