8×10 Lean to Shed Plans Free – PDF Download

This step by step woodworking project is about free 8×10 lean to storage shed plans. This shed is the ideal choice between costs and benefits, because it provides 80 aq ft of storage while being super sturdy and durable. The shed comes with double front doors to the front, so you can have access inside with large objects, such as a lawn mower or furniture. The plans are PDF downloadable and come with full Cut / Shopping lists. Remember that you need to read the local building codes before selecting the right location for the shed and before building the shed. See my other DIY projects HERE. See all my shed plans HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE.

Made from this plan

8×10 Lean to Shed Plans Free – PDF Download

Building a 8×10 lean to shed

Materials

• A – 2 pieces of 2×6 lumber – 120″long, 9 pieces – 93″ long FLOOR
• B – 3 pieces of 4×4 lumber – 120″ long SKIDS
• C – 2 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 24″x48″ long FLOORING
• D – 2 pieces of 2×4 lumber – 96″ long, 1 piece – 89″ long, 9 pieces – 80″ long 2xSIDE WALL
• E – 2 pieces of 2×4 lumber – 113″ long, 1 piece – 120″ long, 9 pieces – 80″ long BACK WALL
• F – 2 pieces of 2×4 lumber – 20 1/2″ long, 1 piece – 120″ long, 1 piece – 113″ long, 6 pieces – 80″ long, 2 pieces – 74 1/2″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
• G – 2 pieces of 2×4 lumber – 120″ long, 9 pieces – 20″ long TOP WALL FRAME

• 3 pieces of 3/4″ plywood – 4’x8′
• 3 pieces of 4×4 lumber – 10 ft
• 2 pieces of 2×6 lumber – 10 ft
• 11 pieces of 2×6 lumber – 8 ft
• 7 pieces of 2×4 lumber – 10 ft
• 45 pieces of 2×4 lumber – 8 ft
• 8d nails, 2 1/2″ screws, 3 1/2″ screws
• 1 5/8″ screws
• wood filler , wood glue, stain/paint
• rafter ties
• joist hangers

Tools

• Safety gloves, glasses
• Miter saw, jigsaw
• Chalk line, tape measure, spirit level, carpentry pencil
• Drill machinery and drill bits

 Time

• 1 week

How to build a 8×10 lean to shed

Building the floor frame

The first step of the project is to build the floor frame for the 8×10 lean to shed. Cut the joists at the right dimensions from 2×6 lumber. Drill pilot holes through the long joists and then drill pilot holes. Insert 3 1/2″ screws into the perpendicular components. Make sure the corners are square. Place the joists every 16″ on center. Measure the diagonals and check if they are equal.

Skids – 8×10 shed

Fit 4×4 skids under the frame, as shown in the diagram. Use rafter ties to lock the skids to the floor frame. The skids will lift the floor frame from the ground and thus protect the components from moisture. I also recommend you to remove the vegetation layer under the shed. Level the surface and apply a layer of gravel, to help with drainage.

Floor sheets – garden shed with lean to roof

Fit the 3/4″ plywood sheets to the floor frame. Align the edges flush and leave no gaps between them. Insert 1 5/8″ screws every 8″ along the framing.

Front wall frame

Build the front wall frame for the storage lean to shed. Cut the components at the right dimensions and then lay them on a level surface. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Use 2×6 lumber for the double header. Sandwich a piece of 1/2″ plywood between the headers. You can adjust the size of the opening to suit your needs. In my design, the opening is 6 ft wide.

Back wall frame

Build the side wall frames from 2×4 lumber. Drill pilot through the plates and insert 3 1/2″ screws into the studs. Place double studs to both ends of the walls and make sure the corners are square. Place the studs every 16″ on center.

Side wall frame – 8×10 shed

Build the back wall for the shed in the same manner described above. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Notice the double studs placed at both ends of the wall frame. Fit pieces of 1/2″ plywood between the double studs.

Fitting the side wall frames

Fit the side walls to the floor of the shed, as shown in the free plans. Align the edges and plumb the wall frames with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. Use temporarily braces to lock the wall frames into place tightly.

Assembling the frame for the 8×10 storage shed

Fit the front and back wall frames to the floor frame of the shed. Align the edges flush and plumb them with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws into the floor. In addition, lock the adjacent wall frames together tightly with 2 1/2″ screws. It is important to have a shed frame well put together, so don’t make economy with the wood screws.

Top back wall frame

Use 2×4 lumber for the top back wall. This frame will help you create the lean to for the garden storage shed. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. You can adjust the size of the studs and thus influence the slope of the shed.

Fitting the top back wall frame

Fit the frame to the back of the shed. Align the edges flush, drill pilot holes and insert 3 1/2″ screws to lock it into place tightly. Plumb the frames with a spirit level.

8×10 lean to shed plans – HowToSpecialist

This shed is sturdy so you don’t have to worry about its integrity for many years. In addition, having the lean to roof makes it the no brainer choice if you are tight on space and you want to build it next to the property line. With little modifications, you can also attach it to an already existing building. You can add windows to the sides of the shed, if you want to get some light inside. The double 6 ft doors provide an easy access into the shed, so you can store large items, as well.

8×10 lean to shed plans – back view

This is the ideal shed for the average homeowner, because it is budget friendly and it provides 80 sq ft of storage area.

8×10 lean to shed plans – front view

If you want to build the lean to roof for this 8×10 storage shed, you should check out PART 2 of the project. I will also show you how to build the double door. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

8×10 lean to shed plans – dimensions

8×10 lean to shed plans

If you want to download the plans. just click on the GET PDF PLANS button bellow.

Thank you for reading our project about free 8×10 lean to shed plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE my projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

<< Previous  |  Next >>

 PRINT PLAN

EXPLORE MORE IDEAS: