10×14 Gable Shed – Free DIY Plans

 

This step by step diy woodworking project is about 10×14 gable shed plans. If you are looking for a compact size gable shed for your garden, I’ve got you covered with step by step plans. The free diy instructions come with 3D diagrams and a full Cut & Shopping list. The plans are also PDF downloadable and Print Friendly. Remember that you need to read the local building codes before starting the construction, so you comply with the legal requirements. See my other shed plans HERE ^[1].

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. The shed has wall frames made from 2x4s, every 16″ on center. See all my Premium Plans HERE ^[2].

 

 

Made from this plan

^[3]

 

 

 

 

10×14 Gable Shed – Free DIY Plans

 

Materials

• A – 4 pieces of 4×4 lumber – 168″ long SKIDS
• B – 2 pieces of 2×6 lumber – 168″ long, 12 pieces – 117″ long FLOOR FRAME
• B – 1 piece of 3/4″ plywood – 48″x96″ long, 1 piece – 48″x72″ long, 1 piece – 48″x88″ long, 1 piece – 48″x80″ long, 1 piece – 24″x96″ long, 1 piece – 24″x72″ long FLOOR
• C – 2 pieces of 2×4 lumber – 20 1/2″ long, 6 pieces – 91 1/2″ long, 4 pieces – 7 1/2″ long, 2 pieces – 78 1/2″ long, 1  piece – 120″ long, 1 piece – 113″ long, 2 pieces of 2×6 lumber – 75″ long FRONT WALL
• D – 2 pieces of 2×4 lumber – 113″ long, 1 piece – 120″ long, 9 pieces – 91 1/2″ long BACK WALL
• E – 2 pieces of 2×4 lumber – 168″ long, 1 piece – 161″ long, 14 pieces – 91 1/2″ long SIDE WALL
• F – 1 piece of 2×4 lumber – 78″ long, 1 piece – 54″ long, 1 piece – 168″ long, 1 piece – 161″ long, 14 pieces – 91 1/2″ long, 8 pieces – 7 1/2″ long, 3 pieces – 25″ long, 2 pieces – 48″ long, 2 pieces – 78 1/2″ long, 4 pieces of 2×6 lumber – 27″ long, 2 pieces – 39″ long SIDE WALL WITH DOOR
• G – 2 pieces of T1-11 5/8″ siding – 24″x96″ long, 4 pieces – 48″x96″ long SIDING

---

• 4 piece of 4×4 lumber – 14′
• 2 pieces of 2×6 lumber – 14′
• 12 pieces of 2×6 lumber – 10′
• 5 pieces of 2×6 lumber – 8′
• 5 pieces of 2×4 lumber – 14′
• 5 pieces of 2×4 lumber – 10′
• 54 pieces of 2×4 lumber – 8′
• 5 pieces of 3/4″ plywood – 48″x96″
• 7 pieces of T1-11 5/8″ siding – 4’x8′
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 4d nails, 16d nails, 6d nails
• skid ties
• joist hanger
• construction glue
• structural nails for ties
• wood filler , wood glue, stain/paint

Tools

• Safety gloves, glasses
• Miter saw, jigsaw
• Chalk line, tape measure, spirit level, carpentry pencil
• Drill machinery and drill bits

Time

• One Week

 

 

Make sure you follow me on YOUTUBE ^[4] and Facebook ^[5] to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest ^[6] to get many ideas for your backyard from all the internet! See how you can Support Me ^[7] with no extra costs to you.

 

 

How to build a 10×14 gable shed with 5:12 pitch

The first step of the project is to build the frame for the 10×14 storage shed. As you can easily notice in the diagram, you need to cut the components at the right dimensions. Use a saw to cut the components from 2×6 lumber. Align the edges with attention and make sure the corners are square. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. You can use joist hanger and 1 1/2″ structural screws, as well.

Fit the 4×4 skids under the floor frame. Align the skids with attention and use screws to lock the frame to the skids. The skids will lift the frame from the ground and therefore, they will protect it from moisture.

Fit 3/4″ plywood sheets to the floor frame. Align the edges flush and insert 1 5/8″ screws, every 8″ along the frame. Leave no gaps between the components.

Building the plain side wall frame is a straight forward process, as you need to cut all the components at the right dimensions and then lock them together tightly with 3 1/2″ screws. Place the studs every 16″ on center and check if the corners are square. Place double studs at both ends of the components for a professional result. Fit pieces of 1/2″ plywood between the double studs. Notice the double top plates.

Next, you need to build the front wall frame. Cut all the components from 2×4 lumber, as shown in the diagram. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs equally spaced. You can adjust the size of the door opening to suit your needs.

Notice the 2×6 double header. Since the 2×6 boards are 1 1/2″ thick, we need to add a piece of 1/2″ plywood between them so we can have an added thickness of 3 1/2″. Add construction glue to the joints and insert 2 1/2″ screws from both sides.

Next, build the back wall for the garden storage shed. Cut the components at the dimensions shown in the diagram and then use the same techniques described above to assemble the wall together tightly.

Last but not least, we have to assemble the side wall with the man door and with the window. Notice the double headers for the door and window. Use 2x6s and 1/2″ plywood for the double headers. You can adjust the size of the window to suit your needs.

Fit the wall frames to the floor of the shed. Align the edges with attention and plumb the wall frames with a spirit level. Drill pilot holes through the bottom plates and insert 3 1/2″ screws. In addition, you need to lock the adjacent wall together tightly with 2 1/2″ screws. Make sure the corners are square and align the edges with attention.

You need to use temporarily braces for the wall frames until everything is locked together tightly. Plumb the wall frames with a spirit level.

Use 5/8″ T1-11 siding sheets for the exterior shed panels. Align the edges flush and leave no gaps between the sheets. Insert 6d nails to secure the panels to the wall framing.

Fit the T1-11 siding panels to the other side of the shed. Align the edges with attention and leave no gaps between the sheets. Make cuts so you can fit the panels around the door and window openings. Insert 6d nails every 8″ along the framing.

This gable shed features double doors on the front for an easy access with large items. The shed also has a 2’x4′ window to one side of the garden shed, so you get a lot of light inside the shelter. In addition, a 3 ft wide man door is present, so you can get in and out of the shed. The shed has a 5:12 roof pitch.

 

This is a compact storage shed, making it ideal for a small backyard. Don’t forget to take a look over PART 2 ^[8] of the project so you learn how to build the roof and the front door for the storage shed.

 

If you like my project, don’t forget to SHARE it on Facebook and Pinterest. I also have plans for a 10×14 lean to shed ^[9], so you might as well take the time and look over it. a lean to roof will help you save even more space in the yard, as you can place it close to the property line.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE ^[3]. In addition, take a look over the rest of my DIY projects HERE ^[10].

 

 

Thank you for reading our project about 10×14 diy shed plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

 

<< Previous  |  Next >> ^[8]

 

 

EXPLORE MORE IDEAS: