Gazebo railings plans

This step by step diy woodworking project is about diy gazebo railings plans. This article features detailed plans for building gazebo railings. In this project we show you how to build simple railing for your wooden gazebo, by using common materials and tools. You can adjust the design and the size of the gazebo to fit your needs and testes. Take a look over the rest of the gazebo project to learn how to build the actual gazebo.

Before starting the actual construction project, we recommend you to plan everything, as to save money and to keep the costs under control. Adjust the size and the design of the gazebo to suit your needs. In addition, we recommend you to invest in high-quality materials, such as pine, redwood or cedar, as they have a nice finish and are highly durable, especially in a humid environment.

Made from this plan

Building the railings

Materials

A – 14 pieces of 2×4 lumber – 65 1/4″ long SUPPORTS
B – 154 pieces of 2×2 lumber – 30″ long BALUSTERS
C – 7 pieces of 2×4 lumber – 65 1/4″ long HANDRAIL

21 pieces of 2×4 lumber – 8 ft
40 pieces of 2×2 lumber – 10 ft
200 pieces of 2 1/2″ screws

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Tips

Use a good miter saw to make the angle cuts
Drill pilot holes before inserting the screws

Time

One Week

PART 1: Gazebo Plans
PART 2: Gazebo Roof Plans
PART 2: Gazebo railings plans

Building the gazebo railings

Fitting the supports

First of all, you need to fit the 2×4 supports to the gazebo. As you can easily notice in the diagram, you need to cut the components at the right size and to drill pocket holes at both ends. Fit the supports into place and secure them to the posts using 2 1/2″ screws. Add glue to the joints and make sure the corners are square. The supports should be 1 1/2″ recessed from the front face of the posts. Adjust the size between the supports to suit your needs.

Fitting the balusters

Next, you need to fit the 2×2 balusters to the supports, as described in the diagram. Cut the components at the right size, drill pilot holes and secure them into place using 2 1/2″ screws. Place the balusters equally-spaced and leave no gaps between the balusters and the supports.

Fitting the handrail

One of the last steps of the project is to attach the handrails to the top of the supports. Drill pocket holes at both ends and secure them to the posts using 2 1/2″ screws. Add glue to the joints and make sure the corners are right-angled. Drive a few finishing nails into the supports to add rigidity to the structure.

Square gazebo plans

Last but not least, we recommend you to take care of the finishing touches. Fill the holes with wood filler and let it to dry out for several hours. Check out the rest of the project to learn how to build the rest of the square gazebo.

Smart Tip: Apply several coats of stain or paint to the wooden components, if you want to protect them from decay and to enhance the look of the diy square gazebo.

Thank you for reading our project about gazebo railings building plans and we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends and LIKE us, by using the social media widgets. SUBSCRIBE if you want to be the first that gets our latest articles.

<< Previous | Next >>

PRINT PLAN