6×16 Firewood Shed Plans – PDF Download

This step by step woodworking project is about 6×16 firewood shed plans. You can build this lean to wood shed under 1000 usd and store up to 4 cords of firewood. This shed has a footprint of 6×16 and it features a large opening to the front, while the other 3 sides are enclosed with 1×6 boards. My woodworking plans come with step by step 3D diagrams, instructions and full CUT ad SHOPPING lists. See my other DIY projects HERE. Lots of PDF downloadable plans with premium features in the Store.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE.

Made from this plan

It’s that easy to build a 4 cord firewood shed!

How-to-build-a-6×16-firewood-shed

6×16 Wood Shed Plans – PDF Download

Byulding-a-6×16-firewood-shed

Materials

A – 2 pieces of 2×6 lumber – 16′ long, 13 pieces – 69″ long FLOOR FRAME
B – 30 pieces of 2×4 lumber – 8′ long FLOOR BOARDS
C – 3 pieces of 2×6 lumber – 78 1/2″ long, 2 pieces – 84″ long, 2 pieces – 62″ long, 3 pieces – 54 1/2″ long POSTS
D – 4 pieces of 2×6 lumber – 8′ long SUPPORTS BEAMS
E – 13 pieces of 2×4 lumber – 8′ long RAFTERS
F – 14 pieces of 1×4 lumber – 102″ long PURLINS
G – 6 pieces of metal roof sheets – 3’x8′ ROOFING
H – 14 pieces of 1×6 lumber – 6 ft long, 12 pieces – 95 1/4″ long SIDE SLATS

6 concrete blocks
2 pieces of 2×6 lumber – 16 ft (floor frame)
7 pieces of 2×6 lumber – 12 ft (floor frame)
4 pieces of 2×6 lumber – 8 ft (support beams)
10 pieces of 2×6 lumber – 8 ft (posts)
43 pieces of 2×4 lumber – 8 ft
14 pieces of 1×4 lumber – 10 ft
6 pieces of metal roof sheets – 3’x8′
7 pieces of 1×6 lumber – 12 ft
12 pieces of 1×6 lumber – 8 ft
200 pieces 1 5/8″ screws
50 pieces of 2 1/2″ screws
75 pieces of 3 1/2″ screws
20 pieces of 3″ lag screws
1 box of structural nails for ties
26 pieces of rafter ties
4 pieces of L ties
2 pieces T ties
stain, wood filler, wood glue

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Time

One Weekend

Building the firewood shed floor

Building-the-floor-frame

Firstly, you need to assemble the frame for the floor of the shed. Therefore, use 2×6 lumber for the joists and lay them on a level surface. Drill pilot holes through the rim joists and insert 3 1/2″ screws into the perpendicular components. Place the joists every 16″ on center and make sure the corners are square. Use at least 2 screws for each joint.

Fitting-the-concrete-blocks

Next, select the location for the shed. Remove the top vegetation layer and level the surface thoroughly. You can use 4×4 skids or concrete blocks under the floor frame of the shed. We need them to lift the frame from the ground and thus, protect the joists from the elements.

You can use 6 or even 10 blocks under the floor frame, because it will support a lot of weight. Using more concrete blocks will prevent the frame from bowing.

Fitting-the-decking-boards

Continue the outdoor project by attaching the 2×4 boards to the floor frame. Align the edges and cut a piece of wood at 1 1/2″ to use it as a spacer. Drill pilot holes and insert 2 1/2″ screws to lock the boards into place. Cut a wood block at 1 1/2″ and then fit it between the boards, to create even and consistent gaps.

Building the frame of the wood shed

Assembling-the-corner-posts

Use 2×6 lumber for the corner posts. Cut the posts at the dimensions shown in the diagram. Add glue to the joints, drill pilot holes and insert 2 1/2″ screws to assemble the corner posts. Make sure you align the edges flush, before inserting the screws.

Fitting-the-corner-posts

The next step of the project is to attach the corner posts to the floor of the shed. Align the edges flush and use a spirit level to plumb the posts before inserting the screws into the floor. Drill pilot holes and insert at least two 3″ lag screws for each joint.

Attaching-the-roof-support-beams

Use 2×6 lumber for the top support beams. Drill pilot holes through the side posts and insert 2 1/2″ screws into the top beam. In addition, notice the structural connectors used to lock the into place the top beams. You need L ties to secure the beams to the side posts. Of course, you need to insert 1 1/2″ structural screws to lock the ties into place.

Notice the T ties to secure the support beams to the middle posts. Make sure all corners are square and align the edges flush.

Building the lean to roof for the wood shed

Building-the-lean-to-rafters

Use 2×4 lumber for the rafters of the lean to wood shed. Mark the cut lines and get the job done with a circular saw. We need the birdsmouth cuts to lock the rafters properly to the support beams. Also, notice the generous overhangs to the front and back of the firewood shed.

Attaching-the-rafters-to-the-6x16-woodshed

Attaching-the-rafters-to-the-6×16-woodshed

Fit the rafters to the top of the shed and place them every 16″ on center. Use rafter ties and 1 1/2″ structural screws to lock the rafters to the top support beams.

Attaching-the-side-wall-slats

Use 1×6 slats for the sides of the firewood shed. Align the edges flush and place a 3″ wood block between the slats. Insert 1 5/8″ screws to lock the slats into place tightly.

Fitting-the-back-wall-slats

Fit the slats to the back of shed, as well. Use 1 5/8″ screws to secure the slats into place.

Fitting-the-purlins

We will cover the roof for this lean to shed with metal sheets, therefore fit the 1×4 purlins to the rafters. Align the edges and insert 1 5/8″ screws to lock the purlins into place. Notice the 6″ overhangs on both sides of the woodshed.

Fitting-the-roofing-sheets

Fit the metal roof sheets to the top of the shed. Use the appropriate screws to secure the metal roof sheets to the purlins. Using metal sheets is a cost effective method to protect the firewood from the elements.

Finishing touches for the woodshed

How-to-build-a-4-cord-wood-shed

Last but not least, take care of the finishing touches. Apply a few coats of paint / stain over the components to enhance the look of the shed and to protect the components from decay.

6x16-firewood-shed-plans--overall--dimensions

6×16-firewood-shed-plans–overall–dimensions

This is a beautiful shed that will help you store 4 cords of wood efficiently and on a super affordable budget. The wood storage shed has generous overhangs on all sides and it features a basic lean to roof with metal sheet roofing. Notice the overall height of the shed is just under 8 ft. If you want to build a large shed that can hold up to 8 cords of wood, you should take a look over these plans.

How-to-build-a-6×16-firewood-shed

You can see the rest of my shed plans HERE. If you like my project, don’t forget to SHARE it on Facebook and Pinterest. This is a simple firewood shed plan that can shelter up to 4 cords of wood, but you can stack a few of these units together for more room. This large shelter is ideal if you heat your house with firewood, as it will keep them dry and protected from the elements.

If you want to download the plans. just click on the GET PDF PLANS button bellow.

Thank you for reading our project about 6×16 large firewood shed plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.