10×20 Shed Plans – DIY Lean to Shed

This step by step woodworking project is about 10×20 lean to shed plans. If you need a large shed that can be built next to the property line, you should take a look over my design. This is a simple but sturdy shed, that features a basic lean to roof and double front doors. Read the local codes before starting the project, so you comply with the requirements. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. My plans come with a full cut / shopping list and they are PDF Download and Print friendly. See all my Premium Plans HERE.

Made from this plan

10×20 Shed Plans – DIY Lean to Shed

Building a 10×20 lean to shed

Materials

• A – 2 pieces of 2×6 lumber – 240″ long, 16 pieces – 117″ long FLOOR FRAME
• B – 8 pieces of 4×4 lumber – 120″ long SKIDS
• C – 4 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces –  48″x48″ long, 2 pieces – 24″x96″ long, 1 piece – 24″x48″ long FLOOR
• D – 2 pieces of 2×4 lumber – 113″ long, 1 piece – 120″ long, 9 pieces – 86 1/2″ long 2xSIDE WALL
• E – 2 pieces of 2×4 lumber – 240″ long, 1 piece – 233″ long, 18 pieces – 86 1/2″ long BACK WALL
• F – 1 piece of 2×4 lumber – 240″ long, 1 piece – 233″ long, 2 pieces – 72″ long, 2 pieces – 78 1/2″ long, 8 pieces – 2 1/2″ long, 2 pieces of 2×6 lumber – 99″ long FRONT WALL
• G – 2 pieces of 2×4 lumber – 240″ long, 18 pieces – 17″ long TOP WALL
• H – 4 pieces of T1-11 siding – 48″x94″ long, 1 piece – 11″x48″ long, 5 pieces – 48″x111 3/4″ long SIDING

• 2 pieces of 2×6 lumber – 20′
• 18 pieces of 2×6 lumber – 10′
• 7 pieces of 3/4″ plywood – 4’x8′
• 7 pieces of 2×4 lumber – 20′
• 6 pieces of 2×4 lumber – 10′
• 57 pieces of 2×4 lumber – 8′
• 5 pieces of 5/8″ T1-11 siding – 4’x8′
• 5 pieces of 5/8″ T1-11 siding – 4’x10′
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 7″ screws
• 8d nails
• rafter ties
• wood filler , wood glue, stain/paint
• joist hanger

Tools

• Miter saw
• Circular saw
• Drill machinery, drill bits
• Safety gloves, glasses
• Chalk line, tape measure, spirit level, carpentry pencil

Time

• One week

Related

• 20×24 gable shed plans
• 6×10 lean to pavilion plans

10×20 Slanted Shed Roof – DIY Plans

10×20 Shed – Floor plans

The first step of the project is to build the floor frame. Cut the joists at from 2×6 lumber. Align the edges flush and make sure the corners are square. Place the joists every 16″ on center. Drill pilot holes and insert 3 1/2″ screws. Alternatively, you can use joist hangers.

Fitting the skids – 10×20 shed

Use 4×4 lumber for the skids. Place the skids under the floor frame. Use rafter ties to secure the skids to the floor frame.

Fitting the floor sheets – 10×20 shed

Use 3/4″ tongue and groove plywood sheets. Cut the sheets at the dimensions shown in the diagram and in the cut list. Leave no gaps between the sheets and align the edges flush. Drill pilot holes and insert 1 5/8″ screws every 8″ along the framing, to secure the sheets into place.

Building the wall frames

Building the side walls – 10×20 shed

Use 2×4 lumber for the side wall frame. Cut the components at the right dimensions, as shown in the diagram. Drill pilot holes through the plates and insert 3 1/2″ screws to assemble the wall frame. Make sure the corners are square and align the edges flush. Place the studs every 16″ on center. You can add windows to the frames, if you want to have natural light inside the storage shed.

Front wall frame – 10×20 shed

Next, assemble the front wall frame. Use 2×4 lumber for the components. Use 2×6 lumber for the double door header. You can adjust the size of the door to suit your needs.

Back wall frame – 10×20 shed

Build the back wall using the same techniques described above. Place the studs every 16″ on center. Use double studs at both ends of the frame.

Assembling the shed frame – 10×20 lean to

Fit the wall frames to the floor of the shed. Align the edges flush and plumb them vertically with a spirit level. Drill pilot holes and insert 3 1/2″ screws through the bottom plates into the floor frame. Check if the corners are square and lock the adjacent wall together tightly with 3 1/2″ screws.

Top back wall frame – 10×20 lean to shed plans

Next, build the wall frame for the back of the shed. Alternatively, you can place this frame to the front of the shed, if you want a roof with a backward slope.

Attaching the wall siding

Fitting the top back wall – 10×20 shed plans

Fit the frame to the front of the shed and align the edges flush. Drill pilot holes through the bottom plate of the top frame and insert 3 1/2″ screws. Plumb the top wall with a spirit level.

Front panels – 10×20 shed

Use 5/8″ T1-11 siding sheets for the front wall. Attach the siding sheets to the front wall and align the edges flush. Insert 8d nails along the wall frames, every 8″. Use a saw to cut out the openings for the door.

Attach the siding sheets to the back of shed, as well. Leave no gaps between the sheets and align the edges flush.

10×20 Lean to Shed Plans

This storage shed features double front doors for easy access and a side window, so you have some light inside. You can add more features to the shed, such as a loft or a shed ramp.

How to build a 10×20 lean to shed

This shed is sturdy and in the same time friendly with the budget. The shed is large enough for the needs of a family.

10×20 Lean to Shed Plans – back view

Make sure you take a look over PART 2 of the project, so you learn how to build the frame and how to build the front doors. I also have plans for a 10×20 gable shed, so don’t miss them out if you are still doubting if the lean to roof is the best choice for your needs.

10×20 Lean to Shed Plans dimensions

10×20 lean to shed plans

If you want to download the Premium plans. just click on the GET PDF PLANS button bellow. If you want the free version, just read the blog FAQs.

Thank you for reading our project about free 10×20 lean to shed plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

<< Previous  |  Next >>

 PRINT PLAN

EXPLORE MORE IDEAS: