2x4 Easy to Build Bench Plans | HowToSpecialist - How to Build, Step by Step DIY Plans

This step by step woodworking project is about 2×4 easy to build bench plans. This bench is a simple project so anyone with basic woodworking skills can make it in a few days. My plans come with step by step instructions and you can easily adjust all the dimensions to suit your needs. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans in the Shop.

Made from this plan

2×4 Easy to Build Bench Plans

Building-a-garden-bench

Materials

A – 4 pieces of 2×4 lumber – 12″ long, 2 pieces – 9″ long, 2 pieces – 12″ long LEGS
B – 3 pieces of 2×4 lumber – 42″ long SEAT
C – 1 piece of 2×4 lumber – 35″ long, 1 piece – 6 1/2″ long SUPPORTS
D – 2 pieces of 1×4 lumber – 43 1/2″ long, 2 pieces – 12″ long TRIMS

3 pieces of 2×4 lumber – 8′
1 piece of 1×4 lumber – 10′
2 1/2″ screws, 2″ brad nails
wood filler , wood glue, stain/paint

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Time

One Day

Building a 2×4 bench seat

Building-the-side-supports

The first step of the project is to build the side legs for the bench. Cut the components at the right dimensions and secure them with pocket screws. Drill pocket holes along the top of the 12″ legs and insert 2 1/2″ screws. In addition, drill pocket holes at both ends of 9″ components and insert 2 1/2″ screws. Align edges with attention and add glue to the joints.

Seat-slats

Attach the 2×4 slats to the top of the supports. Drill pilot holes and insert 2 1/2″ screws. Place a piece of 3/4″ plywood between the slats to create even gaps.

Attaching-the-side-trims

Attach 1×4 trims to the bench, so enhance its look. Align the edges flush and insert 2″ brad nails to secure them into place.

Fitting-the-stretcher

Fit the 2×4 stretcher to the bottom of the bench. Drill pocket holes at both ends of the stretcher and insert 2 1/2″ screws into the side legs.

Fitting-the-middle-support

Fit a 2×4 support to the middle of the bench. Drill pocket holes at both ends of the support and insert 2 1/2″ screws into the frame.

Easy-to-build-bench-plans

Fill the holes with wood putty and smooth the surface with 120-220 grit sandpaper. Apply a few coats of stain and paint to enhance the look of the bench.

2×4-easy-to-build-bench-plans

If you want a quick afternoon project, make sure you check out these plans. This bench is extremely sturdy and it will provide moments of relaxation in your backyard. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Thank you for reading our project about 2×4 easy to build plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

PRINT PLAN