Building a tool tote

This step by step diy woodworking project is about tool tote plans. If you want to learn more about how to build a tool tote, we recommend you to pay attention to the instructions described in the article. There are many designs to choose from when building a tool box, so make sure you take a look over several options before starting the actual construction project.

There are plans to choose from when building a tool tote, so make sure you plan everything with attention and adjust the size and the shape of the tool box to suit your needs. Use quality materials to build the tool tote, such as pine, redwood or cedar, as they have a nice finish and are highly durable. Cut the components at the right size and lock them together with galvanized screws.

In order to get rigid joints and a nice appearance, we recommend you to drill pocket holes using a proper jig. Align the components at both ends, making sure you don’t leave any gaps between them. Add waterproof glue to the joints if you want to enhance the rigidity of the tool box. Make sure the corners are right-angled and smooth the edges with a piece of sandpaper. See all my Premium Plans in the Shop.

Materials

A – 1 piece of 3/4″ plywood – 11 1/4″x18″ long BOTTOM
B – 2 pieces of 1×4 lumber – 18″ long SIDES
C – 6 pieces of 1×6 lumber – 12 3/4″ long FACES
D – 1 piece of 1×6 lumber – 18″ long HANDLE

1 piece of 1×6 lumber – 8 ft
1 piece of 1×4 lumber – 4 ft
1 piece of 3/4″ plywood – 1’x2′
1 1/4″ pocket screws
wood putty
stain

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Tips

Apply several coats of wood stain to the wooden components
Fill the holes with wood filler and smooth the surface

Time

One Day

Tool box plans

Tool tote plans

Building the frame of the tool box

The first step of the project is to build the base of the tool tote. As you can easily notice in the plans, we recommend you to cut the components at the right size and to lock them together tightly. Drill pocket holes on both sides of the bottom component and insert the 1 1/4″ screws into the sides.

Building the faces of the tote

Next, you should build the faces of the tool tote. In order to get the job done in a professional manner, we recommend you to cut a piece of 1×6 lumber to the right dimensions and shape, as shown in the plans. Cut out a rectangle inside the faces by using a jigsaw. Smooth the edges with a piece of sandpaper and remove the residues.

Building the handle

Building the central handle is maybe the most complex step of the project, but any person with basic woodworking skills can pull it through. Follow the pattern described in the plans and build the components with great attention. Mark the cut lines on the slat before adjusting the component at the right size and drill several pilot holes at the bottom, in order to secure it into place properly. Align the component at both ends before inserting the screws and add waterproof glue to enhance the bond of the components.

Tool tote plans

Last but not least, we recommend you to take care of the finishing touches. Fill the holes with wood filler and let it to dry out for several hours. Afterwards, smooth the wooden surface with fine-grit sandpaper and vacuum the residues.

Thank you for reading our project about tool tote plans and we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends and LIKE us, by using the social media widgets, if you want to be the first that gets our latest articles.

PRINT PLAN