Sawbuck made from 2x4s Plans

This step by step woodworking project is about sawbuck made from 2x4s plans. I have designed this super easy and sturdy sawbuck to help you save time and energy when cutting the firewood. Moreover, the best part of the project is that you only need 2x4s and screws. You can adjust the size of the sawbuck to suit your needs. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE.

Made from this plan

Building a 2×4 sawbuck

Materials

A – 6 pieces of 2×4 lumber – 48″ long, 2 pieces – 29 1/2″ long LEGS
B – 4 pieces of 2×4 lumber – 48″ long, 1 piece – 49 1/2″ long BRACES
C – 2 pieces of 2×4 lumber – 33″ long BRACES

7 pieces of 2×4 lumber – 8′
log lifter
2 1/2″ screws
3 1/2″ screws
stain, wood filler, wood glue

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Time

One Weekend

How to build a sawbuck from 2x4s

Cutting the legs

The first step of the project is to build the legs for the sawbuck. As you can easily notice in the diagram, you need to make a 30 degree cut to one end. In addition, make another cut to the opposite end, as shown in the plans. Repeat the process for the remaining legs.

Assembling the legs

Next, you need to assemble the X shaped frames. Lay the legs on a level surface and then align the edges with attention. Drill pilot holes and insert 2 1/2″ screws to lock them together tightly.

Fitting the braces

Continue the project by assembling the frame of the sawbuck. Attach the 2x4s to the X shaped frames. Drill pilot holes through the boards and insert 2 1/2″ screws. Plumb the X-shaped legs to make sure they are perfectly vertical.

Cutting the trims

Next, you need to cut the trims. Use a miter saw to make the angle cuts to the trims.

Fitting the trims

Fit the trims to both ends of the sawbuck and secure them into place with 2 1/2″ screws.

Fitting the cross braces

Next, you need to add the braces to both ends of the sawbuck. Use a miter saw to make the angled cuts and then lock the trims into place with 2 1/2″ screws. Drill pilot holes and insert 2 1/2″ screws to lock them into place tightly.

Fitting the diagonal brace

Next, fit the 2×4 diagonal brace to one side of the sawbuck. Use 2 1/2″ screws to secure the brace into place.

Sawbuck made from 2x4s Plans

Last but not least, you need to take care of the finishing touches. Smooth the edges with sandpaper and make sure the joints are sturdy.

2×4 sawbuck plans

You should also check my firewood shed plans HERE. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Thank you for reading our project about sawbuck made from 2x4s plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

PRINT PLAN