A well-designed miter saw station can transform your workshop, making your cuts more precise and your workspace more organized. In this step-by-step project, we’re building a sturdy and functional miter saw table with side extensions, built-in storage, and an optional dust collection hood. This setup not only gives you a stable surface for accurate cuts but also provides ample workspace and room for future upgrades. Whether you’re a weekend DIYer or an experienced woodworker, this miter saw station will help streamline your workflow and take your projects to the next level.
Designed with efficiency in mind, this miter saw stand includes a large center table for your saw, two spacious side tables for additional support, and an optional T-track fence system for repeatable cuts. The structure is reinforced with diagonal braces for added stability, while the lower shelf keeps tools and accessories within reach. With clear plans and step-by-step instructions, you can build this project in a weekend using basic tools and materials. Get ready to create a workstation that enhances precision, boosts productivity, and keeps your workshop clean and organized.
We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. My plans come with a full cut / shopping list and they are PDF Download and Print friendly. See all my Premium Plans HERE.
Made from this plan
Pin it for Later!
DIY Miter saw station plans
How to Make a Miter Saw Station
Building-a-large-miter-saw-station
Materials
A – LEGS – 2×4 lumber 37 1/2″ – 8 pieces
B – SIDE SUPPORTS– 2×4 lumber 25″ – 10 pieces
B – MIDDLE SUPPORTS – 2×4 lumber 28 1/2″ – 2 pieces
B – APRONS – 2×4 lumber 69″ – 4 pieces
C – APRONS – 2×4 lumber 45″ – 6 pieces
D – SHEVES – 1/2″ plywood – 32″x72″ – 2 pieces
D – SHEVES – 1/2″ plywood – 32″x48″ – 2 pieces
D – MITER SAW TOP – 1/2″ plywood – 32″x32″ – 1 piece
E – BRACES – 2×4 lumber 16″ – 4 pieces
F – SUPPORT – 2×4 lumber 16″ – 1 piece
G – FENCES – 2×4 lumber 72″ – 2 pieces
G – FENCES – 2×4 lumber 48″ – 2 pieces
H – HOOD – 1/2″ plywood – 23″x29″ – 2 pieces
H – HOOD – 1/2″ plywood – 29″x31″ – 1 piece
H – HOOD – 1/2″ plywood – 23″x32″ – 1 piece
- 2×4 lumber 8 ft – 9 pieces
- 2×4 lumber 10 ft – 8 pieces
- 1/2″ plywood – 4’x8′ – 5 pieces
- 1″ screws – 50 pieces
- 1 5/8″ screws – 100 pieces
- 2 1/2″ screws – 100 pieces
- Stain / paint – 1 can
- Glue – 1 piece
- Wood putty – 1 can
- T track – 10 ft
Tools
- Miter saw, Circular saw, Pocket hole jig
- Drill machinery, Drill bits, Jigsaw
- Safety gloves, Glasses, Speed square
- Chalk line, tape measure, spirit level, carpentry pencil
Time
- One weekend
Related
Step 1: Building the small table
Side-frames—small-table
Start by building the side frames for the miter saw table. Cut the 2×4 components to size, following the diagram for accuracy. Drill pocket holes at both ends of the horizontal supports, then secure them to the legs using 2 1/2″ screws. Make sure the edges are flush and check that the corners are square before tightening everything down. Pay attention to the middle support—it’s essential for holding the intermediary shelf in place later on. Taking your time here will ensure a strong and stable foundation for the table.
Assembling-the-small-table
With the side frames assembled, it’s time to bring the table structure together by attaching the front and back aprons. Drill pocket holes at both ends of the aprons, then secure them to the legs using 2 1/2″ screws. Make sure everything is aligned properly and the corners are square before tightening the screws. This step will lock the frame together, ensuring a sturdy and durable base for the miter saw table.
Middle-supports—small-table
Attach the middle supports to the three frames, following the diagram for proper placement. Drill pocket holes at both ends of each support, then secure them using 2 1/2″ screws. Double-check that the corners are square before fully tightening the screws. These supports will add extra stability to the structure and help distribute weight evenly across the table.
Fitting-the-shelves—small-table
Cut the shelves from 1/2″ plywood, making precise notches to fit around the posts for a clean and secure fit. Position the shelves so the edges are flush with the frame, ensuring everything lines up properly. Drill pilot holes to prevent splitting, then secure the shelves to the framing using 1 5/8″ screws, spacing them every 8 inches for solid support. Take your time with the alignment to ensure a professional-looking finish and a sturdy structure.
Braces—small-table
To strengthen the table and prevent any wobbling, install diagonal braces at the back of the structure. Cut the braces at a 45-degree angle on both ends for a snug fit. Position them as shown in the diagram, making sure they sit flush against the frame. Drill pilot holes to prevent splitting, then secure the braces with 2 1/2″ screws. These reinforcements will add extra rigidity, keeping the table solid and stable during use.
Step 2: Building the large table
Side-frames—large-table
Now it’s time to assemble the large table for the miter saw station. Cut the 2×4 components to size, following the measurements in the diagram. Drill pocket holes at both ends of the horizontal supports, then attach them to the legs using 2 1/2″ screws. Make sure the edges are flush and the corners are square before securing everything in place. This step will form the main work surface, providing a sturdy and reliable base for your miter saw setup.
Assembling-the-large-table-frame
Secure the aprons to the side frames using pocket holes and 2 1/2″ screws. Align the edges carefully, ensuring the corners are square and there are no gaps between the components. Double-check that everything is flush before tightening the screws. This step will lock the structure together, creating a strong and stable frame for the miter saw station.
Middle-support—large-table
Install the middle supports to both the top and bottom frames, ensuring they are positioned correctly for maximum stability. Drill pocket holes at both ends of each support, then secure them into place using 2 1/2″ screws. Make sure the supports are flush with the framing and that the structure remains square as you tighten the screws. These supports will help reinforce the table, ensuring it stays strong and level during use.
Tabletop—large-table
Cut the tabletop and bottom shelf from 1/2″ plywood, making precise notches to fit around the posts for a seamless fit. Position the panels flush with the frame, ensuring proper alignment. Drill pilot holes to prevent splitting, then secure the plywood to the frame using 1 5/8″ screws, spacing them every 8 inches for solid support. Double-check the placement before fully tightening the screws to ensure a sturdy and professional-looking finish.
Large-table—back-braces
Install the diagonal braces at the back of the table to reinforce the structure and prevent any movement. Cut the braces to size with 45-degree angles at both ends for a snug fit. Position them as shown in the diagram, making sure they sit flush against the frame. Drill pilot holes to prevent splitting, then secure the braces with 2 1/2″ screws. This step adds extra rigidity, ensuring the table remains stable and durable during use.
Step 3: Building the miter table
Miter-saw-table-frame
Build the frame for the miter saw table by cutting the 2×4 components to size and laying them out on a flat, level surface. Drill pocket holes at both ends of the horizontal supports, then assemble the frame using 2 1/2″ screws. Ensure that the edges are flush and the corners are square before fully tightening the screws. Taking the time to check alignment will result in a strong and stable base for the miter saw station.
Miter-saw-table-top
Secure the 1/2″ plywood panel to the miter saw frame, making sure the edges are flush for a clean and even fit. Drill pilot holes to prevent splitting, then fasten the panel using 1 5/8″ screws, spacing them every 8 inches along the frame. Double-check that the panel is properly aligned before tightening the screws fully. This step will create a sturdy and stable surface for the miter saw, ensuring durability and smooth operation.
Fitting-the-miter-saw-table
Attach the miter saw table to the two side tables, ensuring proper alignment for a seamless work surface. Adjust the height of the miter saw table so that its working surface sits flush with the side tabletops. To achieve this, measure the thickness of the miter saw deck and make any necessary adjustments before securing the table. Once everything is positioned correctly, drill pilot holes and fasten the table to the side extensions using 2 1/2″ screws. Double-check for level alignment before fully tightening the screws to ensure smooth and accurate cutting operations.
Back-support
Fit the 2×4 support to the back of the miter saw station. Drill pocket holes at both ends of the supports and secure them into place with 2 1/2″ screws. Make sure the corners are square and leave no gaps between the components.
Step 4: Building the miter saw hood
Miter-saw-hood—sides
To improve sawdust collection, consider building a simple plywood hood to contain and direct dust more efficiently. Begin by cutting the side panels according to the template, using a circular saw for clean and accurate cuts. Drill pocket holes along the top edge of the panels to prepare them for assembly.
Since miter saws come in different sizes, take a moment to check your saw’s dimensions and adjust the hood’s measurements if needed. A snug fit will help maximize dust collection while keeping your workspace cleaner and more organized.
Attaching-the-back—miter-saw-hood
Cut the back panel to size, ensuring it matches the width of the side panels. Drill pocket holes along the sides and top to create strong joints. Position the back panel between the two side panels, aligning the edges flush for a clean fit. Secure the hood by inserting 1″ screws into the pocket holes, making sure everything is square and tightly locked together. Double-check the alignment before fully tightening the screws to ensure a sturdy and well-fitted dust collection hood.
Attaching-the-top—miter-saw-hood
Cut the top panel to size, ensuring it fits securely over the side and back panels. Position it in place, aligning the edges flush for a clean and even look. Drill pilot holes if needed, then attach the panel using 1″ screws through the pocket holes. Double-check that everything is square before fully tightening the screws to create a strong and stable dust collection hood.
Attaching-the-miter-saw-hood
Position the hood in place, aligning the edges with the side tables for a seamless fit. Drill pilot holes to prevent splitting, then secure it using 1 5/8″ screws to firmly lock it to the side tables. Once the hood is secured, mark and cut out the hole for the vacuum hose, ensuring it fits snugly for maximum dust collection efficiency. This simple addition will significantly improve sawdust control, keeping your workspace cleaner and making your shop a healthier environment.
Assembling-the-fences
For added precision and functionality, consider installing fences on the miter saw station. Cut the boards from 2×4 lumber, ensuring they match the dimensions shown in the plans. Drill pocket holes and use 2 1/2″ screws to join the boards together, creating a sturdy fence structure. Apply wood glue to reinforce the joints and improve overall rigidity.
To take the setup even further, you can integrate a T-track system into the fence. This allows you to install attachments like stops and quick clamps, making repetitive cuts more accurate and efficient. Use a router to create grooves in the fence boards and securely mount the T-tracks in place. This upgrade will enhance both the versatility and precision of your miter saw station.
Fitting-the-fences
Position the fence boards carefully, making sure they align perfectly with the miter saw fence for accurate cuts. Since fence alignment may vary depending on your specific saw model, start by placing the miter saw onto the table and adjusting the fences accordingly. Once properly positioned, drill pilot holes to prevent splitting, then secure the fence boards in place using 1 5/8″ screws. Double-check the alignment before fully tightening the screws to ensure a seamless and precise setup for your miter saw station.
Step 5: Finishing touches
Large miter saw table – front view
To give your miter saw station a clean and professional look, start by sanding all the exposed wood surfaces with medium and fine-grit sandpaper. Focus on smoothing any rough edges or sharp corners to make the station safe and comfortable to use. If you used wood filler to cover pocket holes or screw heads, let it dry completely before sanding it flush with the surface.
DIY Miter saw table
Once sanded, apply a protective finish to extend the life of the workstation. A wood stain will enhance the natural grain, while paint can give it a more customized look that matches your workshop. For added durability, seal everything with a clear polyurethane or water-resistant finish to protect against dust and moisture. Finally, check all screws and fasteners to ensure everything is tight and secure. At this point, you can also install additional accessories like clamps, storage hooks, or even a power strip to make your station even more functional. With these finishing touches, your miter saw station is now fully built, well-protected, and ready for years of use.
DIY Miter saw
To take this miter saw station to the next level, consider adding built-in storage to keep your workspace organized. You can install drawers or shelves underneath the side tables for storing blades, measuring tools, and other accessories. Adding a dedicated power strip to the frame will make it easier to plug in your miter saw and other tools without constantly reaching for an outlet. If you want to improve mobility, attaching lockable caster wheels to the legs will allow you to move the station around the workshop when needed while keeping it secure during use.
Simple miter saw table
Large-miter-saw-station-plans—dimensions
Another great upgrade is integrating a dust collection system for a cleaner workspace. While the plywood hood already helps, you can enhance efficiency by attaching a shop vac or dust separator directly to the saw area. Additionally, upgrading the fence system with a T-track and adjustable stops will allow for more precise, repeatable cuts. If you frequently work with long boards, consider adding flip-up support extensions at both ends to handle larger materials. These improvements will make your miter saw station more functional, efficient, and a valuable addition to your workshop.
Thanks for checking out my how to make a miter saw station with hood! Be sure to explore my other projects for more fantastic ideas. Don’t forget to hit the LIKE button and SHARE with your friends using the social media links below.
