Home Give Back 10×12 Gable Pavilion – DIY Project
Give Back

10×12 Gable Pavilion – DIY Project

by Jack Sander
written by Jack Sander 0 comments 542 views 1 minutes read

 

I strongly encourage you to send photos with your projects built using my plans. Please send the materials at [email protected] or using the contact form. Any submission is highly appreciated by me and by the rest of the readers. In addition, your projects will be seen all around the world, so you can point out your skills. Don’t forget to mention the cost of the materials, the total time of the project as well as a few impressions about the build. 

 

 

Thank you so much for these plans. I have some limited experience in carpentry, and found the plans to be really well done. I used 6×6 Rough Sawn Cedar and cedar 2×4 for the rafters, $2700, 1×6 Pine Vjoint for the ceiling $600, tin for the roofing $500. The hardware and structural screws were shockingly expensive. The hardest part for me was figuring out the rafter cuts, I used a few old 2×4’s to experiment. I messed up on the braces and bought my lumber off 24″ braces instead of 36″, but it still is solid. I saved a bunch of money by doing it myself and gained alot of experience. Total time for me to build was 7 full days, mostly by myself.

By Jess

 

 

Difficulty Level: Simple

Estimated Cost: –

Time required: –

From Plans: https://howtospecialist.com/outdoor/10×12-pavilion-free-diy-plans/

 

 

 

<b>PRINT PLAN<b> PRINT PLAN

EXPLORE MORE IDEAS:

 

You may also like

5×5 Deer Blind – DIY Project

Outdoor Wooden Outhouse – DIY Project

DIY 4×6 Shooting Stand

DIY Small Wood Shed

DIY 5×5 Deer Blind

12×20 Gable Shed – DIY Project

Leave a Comment

* By using this form you agree with the storage and handling of your data by this website.