Table Bench Plans

This diy step by step diy project is about table bench plans. The plans feature detailed instructions for building 6′ long rustic benches for a farmhouse table. Adjust the size and the design of the bench to suit your needs. Add decorative cross-braces, if needed. In addition, take a look over the related plans for more building ideas.

You should always plan everything from the very beginning, in order to prevent costly mistakes and to save time. If this is your first project, you should read the instructions with attention. Invest in high quality lumber and plywood, as the components will be exposed to bad weather. Protect the components with appropriate paint or stain.

There are a few tips that you should take into account, if you want to get a professional result. Therefore, take accurate measurements and use professional tools when making the cuts or when drilling pilot holes. Align the components at both ends and add waterproof glue to the joints, if you want to create a rigid structure. See all my Premium Plans in the Shop.

Made from this plan

Building a farmhouse table bench

Building a table bench

Materials

• A – 4 pieces of 2×4 lumber – 15 1/2″ long LEGS
• B – 2 piece of 2×4 lumber – 11 1/4″ long, 1 piece – 57 1/2″ long SUPPORTS
• C – 2 pieces of 2×4 lumber  – 13 1/2″ long, 1 piece – 55 1/2″ long SUPPORTS
• D – 2 pieces of 2×4 lumber – 65″ long, 2 pieces – 13 1/2″ long, 1 piece of 2×6 lumber – 65″ long SEAT

• 5 pieces of 2×4 lumber – 8 ft
• 1 piece of 2×6 lumber – 6 ft
• 2 1/2″ screws
• glue, stain
• wood filler

Tools

• Safety gloves, glasses
• Miter saw, jigsaw, pocket hole jig
• Chalk line, tape measure, spirit level, carpentry pencil
• Drill machinery and drill bits

Tips

• Use a good miter saw to make the angle cuts
• Drill pilot holes before inserting the screws

Time

• One Day

Realted

• How to build a farmhouse table

Farmhouse table bench plans

Building the legs

The first step of the woodworking project is to build the legs for the bench. Cut both ends of the legs at 80 degrees. Smooth the edges with sandpaper.

Fitting the top supports

Cut the top supports from 2×4 lumber. Make 45 degree cuts to the supports, in order to enhance the look of the bench. Drill pilot holes through the supports and insert 2 1/2″ screws into the legs of the bench. Leave no gaps between the components.

Fitting the side supports

Next, you need to fit the bottom supports to the sides of the bench. Make 10 degree cuts to both ends of the supports. Drill pocket holes at both ends of the supports and secure them to the legs using 2 1/2″ screws.

Fitting the stretchers

Continue the project by attaching the 2×4 stretchers to the rustic 6′ bench. Drill pocket holes at both ends of the components and secure them to the supports using 2 1/2″ screws. Make sure the corners are square.

Building the seat

Cut the components for the seat from 2×4 and 2×6 lumber. Drill pocket holes at both ends of the seat slats and secure them with 2 1/2″ screws to the end components.

Table bench plans

I hope you enjoyed this the step by step plans and you should take a look over the rest of my projects. I would love to hear your feedback and to see your pins, likes and shares. If you build this pet bed don’t forget to send a few pics. If you want to protect them from decay. If you want to get this plan as a PDF file, please take a look over the GET PDF PLANS button bellow. Thank you for the support!

Thank you for reading our project about table bench plans and we recommend you to check out the rest of the projects. Don’t forget to SHARE and LIKE our projects with your friends, by using the social media widgets, if you want to help us keep adding free woodworking plans.