Garden storage shelves plans

This step by step diy project is about garden storage shelves plans free. This backyard project features detailed instructions regarding the construction of a three shelves storage unit. Use basic techniques and materials to better organize your garden tools. Check out the rest of the outdoor projects that are featured on our site.

You should always plan everything from the very beginning, in order to prevent costly mistakes and to save time. In most of the cases, you need a friend to give you a hand when assembling the pergola with swing. Invest in high quality lumber and plywood, as the components will be exposed to bad weather. Protect the components with appropriate paint or stain.

There are a few tips that you should take into account, if you want to get a professional result. Therefore, take accurate measurements and use professional tools when making the cuts or when drilling pilot holes. Align the components at both ends and add waterproof glue to the joints, if you want to create a rigid structure.

Made from this plan

Garden storage shelves plans

Building garden storage sheves

Materials

• A – 2 pieces of 2×3 lumber – 45″  long, 3 pieces – 17 1/2″ long 3xFRAME
• B – 5 pieces of 2×4 lumber – 45″ long 3xSHELVES
• C – 4 pieces of 2×6 lumber – 48″ long LEGS
• D – 4 pieces of 1×4 lumber – 45″ long RAILS

• 5 pieces of 2×3 lumber – 8 ft
• 3 pieces of 2×4 lumber – 8 ft
• 2 pieces of 2×6 lumber – 8 ft
• 2 pieces of 1×4 lumber – 8 ft
• 50 pieces of 2 1/2″ screws – 8 ft
• glue, stain / paint

Tools

• Safety gloves, glasses
• Miter saw, jigsaw
• Chalk line, tape measure, spirit level, carpentry pencil
• Drill machinery and drill bits

Tips

• Use a good miter saw to make the angle cuts
• Drill pilot holes before inserting the screws

Time

• One Weekend

Related

• Storage shelves plans

How to build garden shelves

Building the frames

The first step of the project is to build the frames. Use 2×3 or 2×4 lumber to build the components. Drill pocket holes at both ends of the 17 1/2″ long components and secure them to the perpendicular slats using 2 1/2″ screws. Add glue to the joints and make sure the corners are right-angled.

Attaching the shelves boards

Next, attach the 2×4 slats to the frames. Place the slats equally-spaced, as shown in the diagram. Drill pilot holes and secure the slats to the frames using 2 1/2″ screws. Smooth the edges with fine-grit sandpaper.

Assembling the shelves

Continue the project by attaching the 2×4 or 2×6 legs to both sides of the frames. Adjust the ground clearance as well as the distance between the shelves. Drill pilot holes and insert 2 1/2″ screws into the shelves.

Fitting the back rails

One of the last steps of the project is to fit the guard rails to the back of the storage shelves unit. Drill pocket holes at both ends of the 1×4 slats and secure them to the back legs of the garden shelves. Insert 1 1/4″ screws and add glue to create rigid joints.

Garden storage shelves plans

Last but not least, we recommend you to take care of the finishing touches. In order to get a professional result, fill the holes and the gaps with wood filler and let it dry out for a few hours. Check if there are protruding screws and fix this issue, if necessary.

Thank you for reading our project about pergola with swing plans and we recommend you to check out the rest of the projects. Don’t forget to SHARE and LIKE our projects with your friends, by using the social media widgets, if you want to help us keep adding free woodworking plans.

 PRINT PLAN

EXPLORE MORE IDEAS: