This step by step diy woodworking project is about storage unit plans. If you want to learn how to build a storage unit, we recommend you to pay attention to the instructions described in the article and to check out the related projects. There are many storage projects featured on our site, so don’t be afraid to browse through the rest of the woodworking plans.
Before starting the actual construction project, we recommend you to plan everything, as to save money and to keep the costs under control. Adjust the size and the design of the media shelves to suit your needs. In addition, we recommend you to invest in high-quality materials, such as pine, redwood or cedar, as they have a nice finish and are highly durable, especially in a humid environment.
It is essential to invest in high quality materials, that are also water-resistant, such as pressure-treated lumber. Cut the components at the right size by using a circular saw and smooth the cut edges with a sand block. Don’t forget to ask a skilled friend to assist you during the project, especially if you don’t have a large expertise in the field. You need someone to hold the components into place, while you drive the screws in.
Made from this plan
Storage unit plans
Building a storage unit
Materials
- A – 2 pieces of 3/4″ plywood – 15 1/2″x44 1/2 long SIDES
- B – 2 piece of 3/4″ plywood – 15 1/2″x22 1/2″ long SHELVES
- C – 2 pieces of 1×2 lumber – 44 1/2″ long, 4 pieces – 21″ long TRIMS
- D – 1 piece of 1/4″ plywood – 24″x44 1/2″ long BACK
- E – 1 piece of 1×3 lumber – 24″ long MOLDING
Tools
- Safety gloves, glasses, Miter saw, jigsaw
- Chalk line, tape measure, spirit level, carpentry pencil
- Drill machinery and drill bits
Tips
- Use a good miter saw to make the angle cuts
- Drill pilot holes before inserting the screws
Time
- One Week
Related
- PART 1: Media Cabinet Plans
- PART 2: Storage Unit Plans
- PART 3: Media Console Plans
- PART 4: Top Hutch Plans
Building a storage unit
Building the frame of the storage unit
The first step of the woodworking project is to build the frame of the storage unit. Cut the components out of 3/4″ plywood and smooth the edges with fine-grit sandpaper. Drill pocket holes along both sides of the shelves. Align the edges with attention and secure the shelves to the sides using 1 1/4″ screws. Add glue to the joints and make sure the corners are right-angled.
Attaching the back
Build the back of the storage unit out of 1/4″ plywood and secure the sheet to the frame by using finishing nails and glue. Make sure the corners are square before inserting the screws, to get a professional result.
Fitting the trims to the front face
Build the trims out of 1×2 lumber. Cut the trims at the right size and secure them to the structure by using glue and finishing nails. Make sure the edges are flush before inserting the screws.
Fitting the top trim
Fit 1×3 molding to the top of the storage unit in order to enhance the look of the entertainment center.
Storage unit plans
Last but not least, we recommend you to take care of the finishing touches. Fill the holes with wood filler and let it to dry out for several hours. Place the storage unit to the base cabinets and continue the project by fitting the media console and the top hutch.
Thank you for reading our project about storage unit plans and we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends and LIKE us, by using the social media widgets, if you want to be the first that gets our latest articles.
