Simple planter box plans

This step by step diy project is about simple planter box plans free. If you want to learn more about building a basic planter box, pay attention to this project. This planter box is ideal for any front porch or back patio and it is so easy to build, that any diy-er can get the job done in a few hours. Make sure you smooth all the edges and apply a few coats of paint or stain to protect the components.

You should always plan everything from the very beginning, in order to prevent costly mistakes and to save time. In most of the cases, you need a friend to give you a hand when assembling the simple plant stand. Invest in high quality lumber and plywood, as the components will be exposed to bad weather. Protect the components with appropriate paint or stain.

There are a few tips that you should take into account, if you want to get a professional result. Therefore, take accurate measurements and use professional tools when making the cuts or when drilling pilot holes. Align the components at both ends and add waterproof glue to the joints, if you want to create a rigid structure

Simple planter box plans

Building a planter box

Materials

• A – 8 pieces of 1×3 lumber – 13″ long LEGS
• B – 4 pieces of 1×6 lumber – 36″ long, 4 pieces – 11″ long FRAMES
• C – 2 piece of 1×6 lumber – 34 1/2″ long BOTTOM
• D – 2 pieces of 1×2 lumber – 37 1/2″ long, 2 pieces – 14″ long TRIMS

• 1 piece of 1×3 lumber – 10 ft
• 3 pieces of 1×6 lumber – 8 ft
• 1 piece of 1×2 lumber – 10 ft
• 40 pieces of 1 1/4″ screws
• glue, stain / paint

Tools

• Safety gloves, glasses
• Miter saw, jigsaw
• Chalk line, tape measure, spirit level, carpentry pencil
• Drill machinery and drill bits

Tips

• Use a good miter saw to make the angle cuts
• Drill pilot holes before inserting the screws

Time

• One Day

Related

• Wheelbarrow planter plans 
• Planter box plans 

How to build a planter box

Building the frames

The first step of the project is to build the frames for the planter box. Cut the 1×6 slats at the right dimensions and drill pocket holes at both ends of the short components. Align the edges with attention and make sure the corners are square before inserting the 1 1/4″ screws, to get a professional result. Add glue to the joints to make sure the structure is rigid.

Attaching the bottom slats

Next, you have to fit the 1×6 slats to the bottom of the planter. Drill pocket holes at both ends of the slats and secure them to the frame with 1 1/4″ screws. Drill a few drainage holes through the bottom of the planter.

Assembling the legs

Build the legs for the planter out of 1×3 lumber. Drill pocket holes along the common vertical edge of the right component and insert 1 1/4″ screws. Alternatively use 1 1/4″ nails and glue to lock the legs together.

Fitting the legs

Attach the legs to the planter, as show in the diagram. Drill pilot holes through frames and insert 1 1/4″ screws into the legs of the planter.

Fitting the top trims

One of the last steps of the woodworking project is to attach the 1×2 trims to the top of the planter. Cut both ends of the trims at 45 degrees and secure them into place using 1 1/4″ brad nails. Make sure you leave no gaps between the components for a professional result.

Simple planter box plans

Last but not least, we recommend you to take care of the finishing touches. In order to get a professional result, fill the holes and the gaps with wood filler and let it dry out for a few hours. Check if there are protruding screws and fix this issue, if necessary.

Thank you for reading our project about simple planter box plans and we recommend you to check out the rest of the projects. Don’t forget to SHARE and LIKE our projects with your friends, by using the social media widgets, if you want to help us keep adding free woodworking plans.

 PRINT PLAN

EXPLORE MORE IDEAS: