How to build a bird house

This article is about how to build a bird house. Building bird houses is a fun project, especially if you show your kids how to work with several tools and how to use a regular wooden board to create something unique. On the other hand, you can build a simple and cheap bird house (around 2-5$, according to its complexity) and give it as a gift to someone special. All you need to get the job done in less than an hour is to use a 6” wide wooden board and several basic tools (a jigsaw and a drill machinery with a hole saw drill bit). Nevertheless, before buying the materials or using waste pieces, you need to draw a plan, starting with the dimensions of the wooden bird house up to its final design. From our experience, we recommend you to decide from the very beginning the design of your decorative bird house, otherwise you might not like its final shape.

Remember that you have to use a good wooden board, otherwise your bird house might not be as durable as you plan. In addition, make sure the wood is not treated with toxic substances, if you plan to install it in your backyard. On the other hand, if you want to obtain an unique design, you could reuse several old wooden boards, after you make sure they aren’t rotten. Last but not least, the boards should have the same thicknesses over the whole surface and be as straight as possible.

In order to get the job done in a professional manner, you should use several tools. First of all, you need a jigsaw or a circular saw to cut the main components of the bird house, but a handsaw would work as well, though it would take longer. Next, if you want to obtain a neat result, we recommend you to cut the round entrance using a hole saw drill bit and a drill machinery. Last but not least, you need a hammer to drive in the finishing nails, when locking the bird house together. See all my Premium Plans in the Shop.

 

Made from this plan

Add-Image

 

Building a wooden bird house

How to build a bird house

How to build a bird house

 

Materials

  • A – 2 pieces of 1×6 lumber – 5″ x 9″ long FACES
  • B – 2 pieces of 1×6 lumber – 4″ x 6 1/2″ long SIDES
  • C – 1 piece of 1×6 lumber – 4 1/2″ x 8 long, 1 piece – 5 1/2″ x 8″ long ROOF
  • D – 1 piece of 1×6 lumber – 3 1/2″ x 4″ long BOTTOM

Tools

Tips

  • Design the bird house, before starting the project
  • Use quality wooden boards
  • Drill pilot holes, before inserting the nails, to avoid splitting the wood

Time

  • One hour

Related

 

 

Make sure you follow me on YOUTUBE and Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Me with no extra costs to you.

 

 

How to build a bird house

Bird house plans

Bird house plans

 

Step 1: Decide the dimensions of your easy to build birdhouse. If you haven’t built a birdhouse before or if you like our project, you should use the bird house plans you can see in the image. Building birdhouses is a lot easier if you know its dimensions and design from the beginning of your project.

Don’t forget that these dimensions are a starting point and you can adjust these dimensions according to your needs and tastes.

 

Tools to build a bird house

Tools to build a bird house

 

Step 2: Use the right tools to get the job done in a professional manner. Therefore, we recommend you to use an L-square to draw the components on the board, a jigsaw or a circular saw to cut the wooden pieces and a hole saw to cut the round entrance of the bird house.

Smart tip: We recommend you to pre-drill holes along the edges of the wood pieces, before driving in the nails, otherwise the wood might split.

 

Drawing the front and read gable ends

Drawing the front and read gable ends

 

Step 3: Mark the components on the wooden boards, using an L-square and a carpentry pencil. Work with great care and make sure you use the right dimensions, otherwise the pieces won’t align properly.

Smart tip: Check attentively the wooden board before drawing the pieces and try to avoid the damaged areas.

 

Cutting the wood boards with a jigsaw

Cutting the wood boards with a jigsaw

 

Step 4: Use a jigsaw or a circular saw to cut the sides and the front and back ends of the birdhouse. We recommend you to lock the wooden board into place before cutting it, otherwise it might move and damage the components.

Smart tip: If you don’t habe experience in working with power tools and want to cut straight lines like a professional, you should check our article regarding these techniques.

 

Cutting the front and rear gable ends

Cutting the front and rear gable ends

 

One more gable end left to cut. The front of the birdhouse has been cut along the guidance lines

 

Drawing the sides of the bird houses

Drawing the sides of the bird houses

 

Step 5: Mark the sides of the birdhouse on the wooden board and cut them in the same manner described above. We recommend you to use an L-square to draw the guidance lines properly, otherwise the corners might not be right angled

Work with great care and wear eye protection while cutting the board with a circular saw or a jigsaw.

 

Front and read gable ends and sides of birdhouse

Front and rear gable ends and sides of birdhouse

 

The main components of the bird house have been cut: the front and rear gable ends and the sides. If you have followed our tips, they should be equal (the front with the back, the sides) and align properly.

 

Smoothing the edges with a sand block

Smoothing the edges with a sand block

 

Step 6: Use a sand block to smooth the sharp edges of the wooden pieces. Work with great care and move the sand block several times over the edges until they are smooth enough for your tastes.

Smart tip: Use medium-grit sandpaper, if you want to get the job done quickly and in a professional manner.

 

Close up with bird house edges

Close up with bird house edges

 

Close up with the edges. As you can see the difference is noticeable, but we still have to sand it several times, to get the desired result.

 

 

Building bird houses

Applying glue on the edges

Applying glue on the edges

 

Step 7: Apply wood glue along the edges of the sides components, as in the image. Even though it is not compulsory to use wood glue, we recommend you to use it, as it will increase the bond between the wood pieces. In addition, if the pieces haven’t been cut perfectly straight, the glue will fill the small gaps and the air won’t get in the bird house.

Smart tip: Let the glue one minute before joining the two wooden pieces.

 

Gluing the wooden pieces

Gluing the wooden piece

 

Step 8: Join the front and side of the bird house together, as you can see in the image, making sure the components are align properly. Work with great care and press firmly the front end over the side of the bird house.

 

Locking the components with C-clamps

Locking the components with C-clamps

 

Step 9:  We recommend you to use several C-clamps to lock the components  tightly and leave the glue to dry out for about 5 minutes.

You should notice that the both components of the bird house are aligned properly and the corner is right angled. Even if these aspects might seem minor details, we recommend you to pay attention, if you want to build a durable bird house.

 

Drilling pilot holes before driving in the nails

Drilling pilot holes before driving in the nails

 

Step 10: Drill pilot holes before inserting the finishing nails, otherwise the wood might split. In addition, we recommend you to leave at least 1/2” from the edges of the wooden board to prevent the wood from splitting.

Two nails for each side of the front gable end are enough to secure the birdhouse  properly.

 

Locking together the front and sides of the birdhouse

Locking together the front and sides of the birdhouse

 

Step 11: Insert the nails in the pilot holes, by using a hammer. From our experience, we don’t recommend you to use too much force when hitting the nails, as you might easily damage the wood.

Smart tip: Place the bird house on a wooden block when driving in the nails, to prevent damaging the floor / table you are working on.

 

Fastening the second side of the bird house

Fastening the second side of the bird house

 

Step 12: Attach the other side of the bird house, in the same manner described above. First, you have to drill two pilot holes along the edges of the front end.

Work with patience and make sure you align the components properly before drilling the holes. Check several times to make sure the corners are right angled.

 

Drilling pilot holes in the wood pieces

Drilling pilot holes in the wood pieces

 

Step 13: Fasten the rear gable end to the bird house. Building birdhouses is easy if you have cut the wooden pieces at the right dimensions and use the right plans and techniques.

Drill the pilot holes along the side edges of the rear gable end and insert the finishing nails, by using a hammer.

 

Measuring the location of the entrance

Measuring the location of the entrance

 

Step 14: Mark the center of the round entrance. In order to do it in a professional manner, you have to mark it on the center of the from end. Use an L-square to measure the center of the dird house and mark it with a carpentry pencil.

Usually the location of the birdhouses should be towards the top of the front end, but you should set it according to your needs and testes.

 

Cutting out the birdhouse entrance

Cutting out the birdhouse entrance

 

Step 15: Drill the round entrance of the bird house. In order to cut the entrance, you could use several techniques and tools. From our experience, we consider that a hole saw drill bit will make the quickest and most accurate cuts. Nevertheless, you can mark the hole, drill a starting hole and use a jigsaw to cut it.

Irrespective of your choice, the hole should be around 1 1/4 – 1 1/2”, according to its tenants.

 

The round entrance of the bird house

The round entrance of the bird house

 

After you have cut the round entrance, you should clean the birdhouse thoroughly with a vacuum cleaner. As you can see in the image, the wooden box start to look like an actual bird house.

 

 

Building the roof of the bird house

Fastening the roof of the bird house

Fastening the roof of the bird house

 

Step 16: Cut the narrow piece of the roof and install it into position. In order to get a neat look, we usually cut the roof 1 1/2 bigger in all directions (except the top). In this way the roof will overhang and create a nice effect.

Drive in two nails on each side of the roof and don’t forget to apply glue. Before inserting the nails, make sure the narrow side of the roof is perfectly align in every direction.

 

Predrilling holes before inserting the nails

Predrilling holes before inserting the nails

 

Step 17: Attach the other side of the roof.  First of all, you should cut it a little longer than the first side (add the thickness of the wood you use), as it needs to cover the first piece.

After you set it into position, making sure it is aligned perfectly with the other components, you should predrill two holes on each side, by using a drill machinery with torque control and a small drill bit.

 

Driving in nails to lock the roof

Driving in nails to lock the roof

 

Next, fasten the roof by driving nails in the pilot holes. This procedure is straight forward, just make sure you don’t move the roof from position while inserting the nails.

 

 

How to build the floor of the birdhouse

Installing the birdhouse floor

Installing the birdhouse floor

 

Step 18: Build the floor and attach it to the bird house. First, use a tape measure to determine the dimensions of the floor. Next, use a jigsaw and cut the floor 1/8 smaller, otherwise you might have to force it to fit into position.

In most of the cases, we lock the floor of the bird house by driving in several nails, as the birds will clean it by themselves. Nevertheless, you should know that you might secure the floor to the birdhouse by using hinges, if you want to have access to it anytime you want.

 

Installing the floor of the bird house

Installing the floor of the bird house

 

We have hit the floor gently several times, to make it fit into position. Make sure it is aligned perfectly with the sides before driving in the nails.

 

Fastening the floor with finishing nails

Fastening the floor with finishing nails

 

First, use a drill machinery and a small drill bit to make on pilot hole on each side of the birdhouse. Next, insert the nails by using a hammer. Work with great care to prevent splitting the wood.

 

Building a bird house

Building a bird house

 

Smart tip: Our easy to build bird house is almost ready. All we have to do is to install its perch and to decide how to hang it to a tree.

 

 

Building the perch of the bird house

Drilling hole in the bird house

Drilling hole in the bird house

 

Step 18: Use a drill machinery and an average sized drill bit to make a hole about 2” under the entrance of the bird house. If the wood is thick enough, we recommend not to drill the hole completely. In this manner, you will be able to install the perch without being noticeable from the inside of the bird house.

 

Applying glue in the drilled hole

Applying glue in the drilled hole

 

Pour a small quantity of wood glue in the hole and add a few chips in the mix. In this way, the glue and the chips will lock the perch into position.

 

 

Installing the perch of the birdhouse

Installing the perch of the birdhouse

 

You can use a little twig or a pencil to build the perch. Both solutions are good, so it is up to your tastes if you use the first or the second option. Irrespective of your choice, insert the pencil / twig in the hole and align it with the bird house in all directions.

 

How to build a bird house

How to build a bird house

 

After installing the perch, the bird house is ready to welcome its tenants. Just make sure you hang it to a tree about 6′ / 2m above the ground, to keep the cats away.

Smart tip: In order to hang it to trees, you should use a proper hardware and a piece of wire or a small chain. Irrespective of your choice, we hope that you new bird house will bright up the look of your backyard and offer a cozy home for your favorite birds.

 

 

Thank you for reading our article on how to build a bird house and we recommend you to check out the rest of our projects. Don’t forget to SHARE our articles with your friends, by using the social media widgets. LIKE us to be the first that gets our updates and to help us add more free plans.




Related Posts

10 Comments

  1. terry koczenasz
    • Jack Sander
  2. Linda
    • Jack Sander
  3. Jacqueline
    • Jack Sander
  4. Rachel
    • Jack Sander
  5. Peter
  6. Brent Golden

Add Comment

Leave a Reply to Rachel Cancel reply