How to install metal stud ceiling

This article is about how to install a metal stud ceiling. The benefits of steel studs over the traditional wood studs are significant: they have a lighter weight, they are perfectly straight and have a good resistance over time.  In addition, taking into consideration our experience in this area, we consider that in most cases metal stud framing is a better choice.  As strange as it might sound, in western Europe this technology is used in virtually any domestic project, so you can imagine there are few drawbacks coming with this approach.

Nevertheless, we wouldn’t recommend you using regular metal studs, if you are going to install heavy cabinets, mirrors or chandeliers; in this case you could go for solid wood studs or for heavier gauge metal framing, which come unfortunately at a greater cost. Irrespective of your choice, you will find in this step by step article all necessarily instructions to install a metal stud ceiling by yourself.

Framing a metal stud ceiling is not difficult if you buy the right materials for your needs and use the right techniques. Work with great care and make sure you place the folding stair on a sturdy surface, otherwise you risk injuring yourself. If you don’t have any experience in the field, it would be better to leave this project to a team of qualified professionals. Last but not least, we recommend you to check out the rest of our how to projects if you want to get the best home improvement tips.

Materials

• Metal studs and tracks
• Screws
• Accessories (metal brackets for fastening the metal studs)
• Sandpaper

Tools

• Safety gloves, safety glasses
• Measurement tape
• Carpenter pencil
• Drill machinery with hammering function
• Electric screwdriver
• Hammer, metal scissor, ladder

Tips

• Use a laser level to make sure the ceiling will be perfectly leveled
• Use safety glasses and gloves

 Installing metal track ceiling frame

Using the laser level

The first and most important step of the project is to set a straight level line around the room, at the specific height you want to install the metal stud ceiling frame. There are several alternatives of doing this thing, so you can choose the most convenient one. On one hand, you can use a laser level, which represents the best option in terms of reliability, but this might come at high cost for diy-ers. Just set the laser straight and then mark the contour line of the room. As well you could use a water level, to make a few marks, and then a straight line, to draw the contour.

On the other hand, you can use a water level and make marks around the corners of the room. Then, you should use a caulk line to draw the guidance lines around the ceiling. It is more than obvious that this approach takes more time, but it is equally effective and comes at a lower cost. Nevertheless, of your choice, jut make sure the contour line is leveled so you can build a cheap and simple metal stud ceiling frame.

Installing metal track framing

After we have drawn the contour, we have proceeded to the installation of the first metal track. You should always start with the longest wall of the room. In order to do that, we have drilled holes through the metal track in the supporting wall, made of bricks.

Afterwards, we have locked the metal track with screws and dowels. If we had dealt with a timber frame, then it would have been possible to screw the metal track directly in the studs, without pilot holes. The most important aspect is to install the track perfectly straight, otherwise you will get a curved ceiling.

Screwing in the metal track

Next, we have continued installing the metal track around all the walls using the same technique. The metal track must be fixed in screws every 15”/40 cm.

It is essential to secure firmly the metal track in the walls, as it will support the metal studs, and eventually the drywall ceiling. For concrete walls use one and a half inch screws and appropriate dowels, as for wood walls use one inch wood screws.

Metal track frame fixed to wall

This is how the metal track should look after it has been secured with screws.

Note that there might be small gaps between the metal profiles and the wall, if the latter is not perfectly straight, but you shouldn’t be worried unless the gaps are relatively large (over half  an inch), in which case you should straighten the wall first.  When securing the metal track, make sure you are choosing only the best pieces you can get, as you shouldn’t choose deteriorated ones.

Cutting metal stud

The next step is to complete the frame on the longest walls of the room, by fixing the rest of the metal track. Most probably you will have to adjust the length of the metal studs, so it is the time to make a cut using a measuring tape (to mark the right dimension) and metal scissors.

The cuts should be made as  precise as possible, making sure the edges are straight. Use safety gloves, to avoid injuring yourself in the sharp edges.

Metal track ceiling joints

After we had finished installing the metal tracks alongside the longest walls, we continued  securing the rest of the perimeter. Notice that around corners, you should install a L-shaped metal track.

In order to create the L-shaped metal track, we used tin snips to cut the metal studs flanges . Consequently, at any corner of the room, the metal tracks should overlap each other at least 15”/40 cm; the new piece of metal should be placed in the channel of the installed metal track. Use screws to secure the frame.

Taking measures to install metal studs

After we have completed installing the metal track, we’ve made marks every 15”/40 cm, using a carpenter’s pencil and a measuring tape. These marks represent the layout for the metal studs we’ll have installing, to complete the ceiling frame.

If you secure the studs at a greater distance, then you risk getting a crooked ceiling. Just observe these distances, make sure the track is leveled and you are on the way of building a great drywall ceiling. Make sure you make the  marks on opposite walls starting in the same direction.

Metal stud ceiling framing

Installing the metal studs

In this image you can see the process of installing the central stud in the metal track. When cutting the metal studs, make sure that they will fit easy in the channel and you don’t have to push them with force.

After we have inserted the metal studs inside the channels, we fastened them to the metal tracks with screws. Also, you might notice that we have installed mineral wool isolation, before framing the metal studs.

Notice that you have to install two layers of metal studs, one in the metal tracks and the other one above the metal tracks, perpendicular on the previous layer of metal studs. Make sure you drive in screws to make the metal stud frame rigid. When using the ladder make sure the support surface is firm, and the ladder is in well condition. It is better to work in team, ideally with a certified professional.

Installing the metal stud brackets

The final step is to secure the whole metal frame by using metal brackets. First you should screw them in the wood studs, or in the ceiling structure. Next, we straightened the bracket’s flanges and secured them with screws to the metal studs.

In most of the cases, the bracket is too long, so you have to cut the excess material with metal scissors. This operation is usually unobserved by diyers, but we assure you that on the long rung, you won’t have any issue with your drywall ceiling, if you secure the metal stud frame with brackets.

Metal stud ceiling frame

The metal stud ceiling frame is completed, after about 3 hours of continuous work. The metal tracks and studs are installed firmly, therefore the frame is perfectly level, as we have used the laser level.

Make sure you install the metal studs every 15-25”, otherwise they won’t be able to support the weight of the plasterboards. Remember that a wrong measurement can make the difference between a successful project and a total fiasco, so hire a specialist if you don’t have experience in the field.

Thank you for reading how to install metal stud ceiling and we recommend you to check out our other projects. In addition, don’t forget to share our projects with your friends, by using the social media widgets.