Shed Plans with Garage Door Plans

This step by step woodworking project is about free shed plans with garage door. If you want to build a 12×16 shed with a large garage door and a smaller door on one side, these are the plans to follow. This shed will be ideal for storing a motorcycle or an ATV, as the access door is wide enough for them to fit inside. My plans come with step by step instructions and you can easily adjust all the dimensions to suit your needs. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans in the Shop.

Made from this plan

Shed Plans with Garage Door Plans

building-a-shed-with-roll-up-door

Materials

• A – 3 pieces of 4×4 lumber – 192″ long SKIDS
• B – 2 pieces of 2×6 lumber – 192″ long, 13 pieces – 141″ long JOISTS
• C – 4 pieces of 3/4″ plywood – 48″x96″ long, 4 pieces – 48″x48″ long FLOOR
• D – 2 piece of 2×4 lumber – 192″ long, 1 piece – 185″ long, 13 pieces – 90″ long SIDE WALL
• D – 2 piece of 2×4 lumber – 192″ long, 1 piece – 185″ long, 13 pieces – 90″ long, 2 pieces – 78 1/2″ long, 4 pieces – 6″ long, 2 pieces of 2×6 lumber – 39″ long SIDE WALL
• E – 1 piece of 2×4 lumber – 137″ long, 1 piece – 144″ long, 2 pieces – 20 1/2″ long, 4 pieces – 90″ long, 2 pieces – 82 1/2″ long, 2 pieces of 2×8 lumber – 99″ long FRONT WALL
• F – 2 pieces of 2×4 lumber 137″ long, 1 piece – 144″ long, 7 pieces – 90″ long BACK WALL
• G – 14 pieces of T1-11 siding – 48″x96″ long SIDING

• 3 pieces of 4×4 lumber – 16′
• 2 pieces of 2×6 lumber – 16′
• 13 pieces of 2×6 lumber – 12″
• 6 pieces of 2×4 lumber – 16′
• 5 pieces of 2×4 lumber – 12′
• 41 pieces of 2×4 lumber – 8′
• 1 piece of 2×6 lumber – 8′
• 2 pieces of 2×8 lumber – 10′
• 14 pieces of T1-11 siding
• 6 pieces of 3/4″ plywood – 4’x8′
• 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
• 4d nails
• wood filler , wood glue, stain/paint
• roll up door
• joist hanger
• structural nails for ties

Spreadsheet

• Materials List and Costs (courtesy of Chris)

Tools

• Safety gloves, glasses
• Miter saw, jigsaw
• Chalk line, tape measure, spirit level, carpentry pencil
• Drill machinery and drill bits

Time

• One Day

Building a 12×16 shed with garage door

Building-the-floor-frame

Fist of all, you need to frame the floor. Cut the joists at the right dimensions and smooth the edges with sandpaper. Align the edges flush and then lock them together with 3 1/2″ screws. Drill pilot holes through the rim joists and insert the screws into the perpendicular components. You can use 2×6 or 2×8 lumber for the joists, according to the weight you are going to put on the floor.

Fitting-the-skids

Attach the 4×4 skids to the floor frame of the shed. Drill pilot holes through the joists and insert 3 1/2″ screws into the skids. Place the skids equally spaced, so they can support the weight of the shed evenly.

Fitting-the-floor-sheets

Attach the 3/4″ plywood sheets to the floor frame. Align the edges flush, drill pilot holes and insert 1 5/8″ screws to secure the sheets into place.

Building-the-side-wall-frame

Build the wall frames for the 12×16 shed with garage door from 2×4 lumber. Cut the components at the right dimensions. Drill pilot holes through the top plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center, for a professional result.

Building-the-side-wall-frame-with-door

Frame the side wall with door for the shed by using the information from the diagram. As you can easily notice in the diagram, you need to frame the door opening properly, so the frame is rigid enough. Needless to say that you can adjust the door opening to suit your needs.

Building-the-back-wall

Build the back wall for the storage shed in the same manner described above.

Building-the-front-wall

Frame front wall for the shed. As you can see in the diagram, you need to leave a large opening for a garage door. It is always a good idea to decide what door you will fit to the opening before framing the wall, so you leave enough space.

Siding-to-the-front-wall

Attach the T1-11 siding to the exterior of the shed. Cut the panels to the right dimensions and shapes and then secure them into place with 2″ brad nails. Leave no gaps between the sheets for a neat result.

Siding-to-the-side-wall

Fit the sheets to the plain side of the shed. As you can imaging, this process should go really easy and quick, as there are no many cuts to make. Align the sheets into place and then secure them with 2″ brad nails.

Siding-to-the-side-wall-with-door

Attach the T1-11 siding sheets to the side of the shed with the door opening. Align the edges flush and then insert 2″ brad nails.

Siding-to-the-back-wall

Fit the T1-11 siding to the back wall, as well, using the same techniques described above.

Shed-with-garage-door-plans

If you want build this ATV shed with roll up door you should check out PART 2 and PART 3 of the project, where I show you how to frame the roof. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

If you want to download the plans. just click on the GET PDF PLANS button bellow.

Thank you for reading our project about free shed plans with garage door and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

<< Previous  |  Next >>