DIY Shed Ramp Plans

This step by step woodworking project is about free shed ramp plans. This article is PART 3 of the shed with garage door project, where I show you how to frame the ramp. This ramp is extremely sturdy and it provides a lot of accessibility to the interior of the shed. If you have a motorcycle, a lawn tractor or even an ATV, you will find it extremely easy to store them inside the shed. My plans come with step by step instructions and you can easily adjust all the dimensions to suit your needs. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans in the Shop.

 

 

Made from this plan

Add-Image

 

 

Building a shed ramp

Building a shed ramp

Building a shed ramp

 

Materials

  • A – 4 pieces of 2×8 lumber – 49 1/2″ long JOISTS
  • B – 1 piece of 2×4 lumber – 96″ long SUPPORT
  • C – 9 pieces of 1×6 lumber – 96″ long RAMP

Tools

Time

  • One Day

 

 

DIY Shed Ramp Plans

building-the-joists-for-the-ramp

Building-the-joists-for-the-ramp

The first step of the project is to build the joists for the shed ramp. Cut one end of the joists at 80 degrees, using a miter saw.

ramp-joists

Ramp-joists

Mark the cut lines on the joists and then get the job done with a circular saw.

joists-for-ramp-notch-for-supports

Joists-for-ramp-notch-for-supports

Make a notch to the bottom of the joists, so you can install the support. Mark the cut lines and then make repetitive cuts with a circular saw. Remove the excess material with a chisel and smooth the edges with sandpaper.

fitting-the-support-beams

Fitting-the-support-beams

Fit the joists to the front of the shed, making sure you place them equally-spaced. Use joist hangers to lock them to the shed frame, or you should toe nail them into place.

fitting-the-ramp-support-slat

Fitting-the-ramp-support-slat

Fit the 2×4 support to the base of the ramp. Drill pilot holes through the joists and then insert 2 1/2″ screws into the support.

fitting-the-ramp-slats

Fitting-the-ramp-slats

Fit the 1×6 or 2×6 slats to the joists, so you can build the ramp. Drill pilot holes and insert 2 1/2″ screws to lock the slats into place tightly.

shed-with-roll-up-door-plans

Shed-with-roll-up-door-plans

Seen from one side, the shed has a really nice design. You can build this shed in any area of your backyard and it will blend in nicely with the landscaping.

shed-with-garage-door-plans

Shed-with-garage-door-plans

If you want build this ATV shed with roll up door you should check out PART 1 and PART 2 of the project, where I show you how to frame roof and the frame of the shed. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE. In addition, take a look over the rest of my DIY projects HERE.

 

 

Thank you for reading our project about free shed ramp plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

 

<< Previous  |  Next >>

 




Related Posts

Add Comment