This step by step woodworking project is about free 16×20 double shed doors plans. This is PART 3 of the large storage shed project, where I show you how to build the double doors and how to fit the decorative trims. Take accurate measurements and double check them before making the cuts. Take a look over all my SHED PLANS, as well. See my other DIY projects HERE.
We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting.
Made from this plan
16×20 Double Shed Doors Plans
- M – 4 pieces of 1×4 lumber – 94″ long, 2 pieces – 192″ long, 4 pieces – 93 3/4″ long TRIMS
- N – 2 pieces of 2×4 lumber – 87 1/2″ long, 1 pieces – 79″ long JAMBS
- O – 1 piece of T1-11 siding – 36″x77 1/2″ long, 2 pieces of 2×4 lumber – 36″ long, 2 pieces – 80 1/2″ long, 1 piece – 29″ long 2xDOOR
- 16 pieces of 1×4 lumber – 8′
- 2 pieces of T1-11 siding – 4’x8′
- 10 pieces of 2×4 lumber – 8′
- 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
- 4d nails, 16d nails, 6d nails
- shed hinges & latch
- wood filler , wood glue, stain/paint
- Safety gloves, glasses
- Miter saw, jigsaw
- Chalk line, tape measure, spirit level, carpentry pencil
- Drill machinery and drill bits
- One Day
How to build double shed doors
The first step of the project is to build and attach the 2×4 jambs around the door opening. Align the edges flush and then secure them into place with 2 1/2″ screws.
Build the double doors from T1-11 siding and from 2×4 lumber. First, you need to assemble the door frame using pocket holes and 2 1/2″ screws. Make sure the corners are square and align the edges with attention. Fit the panels to the door frames and secure them into place with 2″ brad nails.
Fit the doors to the door opening and secure them to the jambs with hinges. Install a latch so you can lock the door together properly. Moreover, install handles so you can open and close the doors easily.
The next step of the project is to fit the 1×4 trims to the sides of the shed. Align the edges flush and insert 2″ brad nails to lock the trims into place tightly.
Last but not least, you need to fit the trims to the front and back of the shed. Make the cuts, align the edges and insert 2″ brad nails to lock them into place tightly.
If you want to build the frame for this 16×20 garden shed, you should check out PART 1 of the project. Check out PART 2 of the project, if you want to learn how to build the gable roof for the shed. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.
Thank you for reading our project about free 16×20 double shed door plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.
<< Previous | Next >>