This step by step woodworking project is about 14×14 gable shed roof plans plans. This is the PART 2 of the 14×14 garden shed project, where I show you how to build the gable roof for the shed. The gable roof has a 30 degree slope and it will add unique charm to the shed. My plans come with step by step instructions and you can easily adjust all the dimensions to suit your needs. See my other DIY projects HERE.
We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE.
Made from this plan
14×14 Shed Roof Plans
Building a 14×14 shed
Materials
- F – 4 pieces of 4×4 lumber – 34 1/2″x48″ long, 2 pices – 48″x55 1/4″ long, 2 pieces – 24″x48 1/4″ SIDING
- G – 16 pieces of 2×6 lumber – 110″ long, 8 pieces – 168″ long, 16 pieces – 9 3/4″ long, 16 pieces – 37 1/2″ long, 4 pieces – 23 1/2″ long TRUSSES
- H – 4 pieces of 2×6 lumber – 110″ long, 12 pieces – 8″ long 2xOVERHANG
- I – 4 pieces of 3/4″ plywood – 48″x96″ long, 4 pieces – 48″x72″ long, 4 pieces – 11 3/4″x96″ long, 4 pieces – 11 3/4″x14″ long, 2 pieces – 14″x72″ long, 2 pieces – 14″x96″ long ROOF
- K – 350 sq ft of tar paper, 350 sq ft of asphalt shingles ROOFING
- L – 32 pieces of 1×8 lumber – 191 1/4″ long, 4 pieces – 111 1/4″ long TRIMS
- 26 pieces of 2×6 lumber – 10′
- 8 pieces of 2×6 lumber – 14′
- 11 pieces of 2×4 lumber – 8′
- 11 pieces of 3/4″ plywood – 48″x96″
- 1/2″ plywood
- 3 pieces of T1-11 5/8″ siding – 4’x8′
- 4 pieces of 1×8 lumber – 10′
- 4 pieces of 1×8 lumber – 8′
- 350 sq ft of tar paper, 350 sq ft of asphalt shingles
- 2 1/2″ screws, 3 1/2″ screws, 1 5/8″ screws
- 4d nails, 16d nails
- wood filler , wood glue, stain/paint
Tools
- Safety gloves, glasses
- Miter saw, jigsaw
- Chalk line, tape measure, spirit level, carpentry pencil
- Drill machinery and drill bits
Time
- One week
How to build a 14×14 shed roof
Assembling the trusses
The first step of the project is to build the trusses for the shed. Use 2×6 lumber for the rafters and make the angle cuts as shown in the diagram. Lay the components on a level surface, such as the shed frame and make a jig, so you can assemble all the trusses easier. Leave no gaps between the rafters and then align the edges flush. Fit 1/2″ plywood gussets over the joints or metal plates.
Set the miter saw at 30 degrees for the rafters (after you make the cut, the angle of the rafter will have 60 degrees)
Set the miter saw at 60 degrees for the bottom chord (after you make the cut, the angle of the rafter will have 30 degrees)
Gable end supports
Fit 2×4 supports to the gable ends. Drill pocket holes at both ends of the supports and then secure them into place tightly with 2 1/2″ screws.
Fitting the trusses
Fit the trusses to the top of the square shed. Plumb the trusses with a spirit level and then lock them into place tightly with rafter ties. Place the trusses every 24″ on center.
Building the overhangs
Build the overhangs for the shed from rafters and 2×6 blocking. Remember that you can easily adjust the size of the overhangs to suit your needs. Drill pilot holes through the rafters and insert 2 1/2″ screws.
Gable end panels
Use T1-11 siding for the gable ends. Cut the panels to size and shape and then attach them into place with nails. Leave no gaps between the panels, for a professional result. Use 6-8d nails to secure the panels into place tightly.
Fitting the overhangs
Fit the overhangs to the front and to the back of the shed. Align the edges, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.
Roof sheets
The next step of the project is to attach the 3/4″ plywood sheets to the top of the shed. Align the edges flush and secure them into place with 1 5/8″ screws, every 8″ along the framing. Make sure you leave no gaps between the sheets for a neat result.
Side roof trims
Fit the 1×8 trims to the sides of the roof. Cut the trims at the right dimensions and then secure them into place tightly with 2″ nails.
Front and back roof trims
Build the front and the back roof trims from 1×8 lumber. Make the angle cuts to the trims and then secure them into place with 2″ nails.
Fitting the roofing
The next step of the woodworking project is to cover the roof with felt. As you can see in the image, you need to make sure the strips of roofing felt overlap at least 2”. In addition, you have to lock the tar paper to the plywood sheets with staples. Attach the asphalt shingles to the roof, making sure you follow the manufacturer’s instructions.
14×14 shed plans – back view
You really need to take a look over PART 1 of the project, so you learn how to build the frame of the shed. check out PART 3 of the project, so you learn how to build the doors for the shed.
14×14 shed plans
This shed project is super easy to complete from the ground up to the roof, using my free plans. This shed is ideal for any backyard, as you can use it both for storage and as a workshop. You can repair your tools, bikes and so much more in this beautiful and functional shed.
Thank you for reading our project about free 14×14 gable shed roof plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.
