12×20 Gable Roof Plans

This step by step woodworking project is about free 12×20 garden shed plans. This is PART 2 of the large shed project, where I show you how to build the gable shaped roof. Cut all the components and then lock them to the top of the shed for a professional result. Check out the rest of the projects for detailed instructions on how to make the frame and the doors for the shed. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans in the Shop.

 

 

Made from this plan

Add-Image

 

 

12×20 Gable Roof Plans

Building a 12x20 shed

Building a 12×20 shed

 

Materials

  • H – 4 pieces of T1-11 siding – 31 3/4″x48″ long, 2 pieces – 45 1/2″x48″ long SIDING
  • I – 2 pieces of 2×4 lumber – 98″ long, 1 piece – 144″long 11xTRUSSES
  • I – 4 pieces of 2×4 lumber – 25 1/4″ long, 2 pieces – 38″ long SUPPORTS
  • J – 4 pieces of 3/4″ plywood – 34″x96″ long, 8 pieces – 48″x96″ long ROOF
  • K – 350 sq ft of tar paper, 350 sq ft of asphalt shingles ROOFING
  • L – 4 pieces of 2×4 lumber – 98″ long, 14 pieces – 6 1/2″ long 2xOVERHNAG
  • M – 4 pieces of 1×6 lumber – 100″ long, 2 pieces – 260″ long TRIMS

Tools

Time

  • One Day

 

 

Make sure you follow me on YOUTUBE and Facebook to be the first that gets our latest plans and for some other exclusive content. Also, follow me on Pinterest to get many ideas for your backyard from all the internet! See how you can Support Me with no extra costs to you.

 

 

Building a gable roof for a 12×20 shed

Building the rafters

Building the rafters

The first step of the project is to build the rafters for the 12×20 shed. Use a miter saw to make cuts to both ends of the slats.

Assembling the truss

Assembling the truss

Lay the rafters on a level surface and then leave no gaps between them. Cut the bottom rafters for the trusses using the instructions described in the diagram.

Gussets

Gussets

Use 1/2″ plywood for the gussets. Attach the gussets to the joints. Drill pilot holes and insert 1 5/8″ screws to lock the gussets into place tightly. Add glue to the joints.

Fitting the trusses

Fitting the trusses

Fit the trusses to the top of the 12×20 shed. Place the trusses every 24″ on center and use a spirit level to plumb them. Use rafter ties to secure the rafters into place tightly.

Gable end supports

Gable end supports

Fit 2×4 supports to the gable ends, so you can install the panels. Drill pocket holes at both ends of the supports and insert 2 1/2″ screws to lock them into place tightly.

Fitting the gable end panels

Fitting the gable end panels

Use T1-11 siding for the gable ends. Cut the panels at the right dimensions and shapes and then lock them into place with 6-8d nails.

Building the overhangs

Building the overhangs

Assemble the overhangs for the storage shed using 2×4 lumber. Drill pilot holes through the rafters and insert 2 1/2″ screws into the blockings.

Fitting the overhangs

Fitting the overhangs

Fit the overhangs to the front and back of the shed. Align the edges flush, drill pilot holes and insert 3 1/2″ screws into the gable ends.

Fitting the roof sheets

Fitting the roof sheets

The next step of the project is to attach the 3/4″ plywood sheets to the top of the roof. Align the edges flush and then lock them to the rafters, every 8″, using 1 5/8″ screws. Make sure you leave no gaps between the sheets for a nest result. You can use other patterns for laying the sheets, as well.

Building the roof trims

Building the roof trims

Use 1×6 lumber for the roof trims. Cut both ends of the trims at 60 degrees.

Fitting the roof trims

Fitting the roof trims

Fit the trims to the front and to the sides of the roof. Use brad nails to lock the trims into place tightly.

Fitting the roofing

Fitting the roofing

The next step of the woodworking project is to cover the roof with felt. As you can see in the image, you need to make sure the strips of roofing felt overlap at least 2”. In addition, you have to lock the tar paper to the plywood sheets with staples.

Next, you should install the shingles to the roof of the large shed. Start with the bottom of the roof, by fitting the first course, as in the image. Use roofing tacks to secure the shingles to the roofing sheets.

Start the first course with a full tab, the second with 2 1/2 tabs, the third with 2 tabs, the forth with 1 1/2 tabs, the fifth with 1 tab, the sixth with half tab and the seventh with a 3 tabs. Secure the shingles with roofing tacks.

12x20 Shed Plans

12×20 Shed Plans

If you want to build the frame for this gable storage shed, you should check out PART 1 of the project. Check PART 3 of the project to learn how to build the double doors. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE. In addition, take a look over the rest of my DIY projects HERE.

 

 

Thank you for reading our project about free 12×20 garden shed plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

 

<< Previous  |  Next >>

 




Related Posts

2 Comments

  1. Ed papp
  2. Rico

Add Comment