12×16 Lean to Shed Roof Plans

This step by step woodworking project is about free 12×16 garden shed plans. This is PART 2 of the project, where I show you how to build the roof for the storage shed. The lean to roof will drain the water properly. Remember that you need to read the local building codes before selecting the right location for the shed and before building the shed. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans in the Shop.

 

 

Made from this plan

Add-Image

 

 

12×16 Lean to Shed Roof Plans

Building a 12x16 lean to shed

Building a 12×16 lean to shed

 

Materials

  • – 2 pieces of 2×4 lumber – 192″ long, 11 pieces – 34 1/2″ long WALL FRAME
  • I – 4 pieces of T1-11 siding – 43 1/4″x48″ long SIDING
  • J – 9 pieces of 2×6 lumber – 168″ long RAFTERS
  • K – 2 pieces of 2×4 lumber – 31 3/4″ long, 2 pieces – 25 1/4″ long, 2 piece – 12 1/2″ long, 2 pieces – 2″ long SUPPORTS
  • L – 5 pieces of 3/4″ plywood – 48″x96″ long, 2 pieces – 48″x48″ long, 2 pieces – 24″x48″ long, 1 piece – 24″x96″ long ROOF
  • M – 2 pieces of 1×8 lumber – 192″ long, 2 piece – 171″ long TRIMS
  • N – 300 sq ft of tar paper, 300 sq ft of asphalt shingles ROOFING

Tools

 

 

12×16 lean to shed – Video!

 

 

Building a lean to roof for a 12×16 shed

Top back wall frame

Top back wall frame

First of all, you need to build the top frame for the back wall. Cut the components from 2×4 lumber. Drill pilot holes through the plates and insert 3 1/2″ screws into the studs. Place the studs every 24″ on center.

Fitting the top back wall

Fitting the top back wall

Fit the frame to the back wall. Use a spirit level to plumb the walls, drill pilot holes through the bottom plates and insert 2 1/2″ screws. Align the edges with attention for a professional result.

Building the rafters

Building the rafters

The next step of the project is to build the rafters for the shed out of 2×6 lumber. Mark the cut lines on the rafters and get the job done using a saw. Smooth the edges with attention for a professional result.

Fitting the rafters

Fitting the rafters

Fit the rafters to the top of the roof. Make sure you lay the rafters every 24″ on center.

Top back wall - siding

Top back wall – siding

Cut the siding panels and lock them to the top of the back wall. Use 6d nails to secure them into place.

Lean to roof side supports

Lean to roof side supports

Fit 2×4 supports to the lean to sides of the roof. Drill pocket holes at both ends of the supports and lock them into place tightly with 2 1/2″ screws. Make sure the corners are square for a professional result.

Lean to roof ends

Lean to roof ends

Use T1-11 siding for the lean to ends of the shed. Mark the cut lines on the sheets and get the job done with a saw. Attach the panels, align them and use 6-8d nails, every 8″ along the framing.

Fitting the roof sheets

Fitting the roof sheets

Attach the 3/4″ plywood sheets to the roof of the shed. Align the edges with attention, making sure there are no gaps between the sheets. Drill pilot holes and insert 1 5/8″ screws to lock the sheets into place.

Fitting the roof trims

Fitting the roof trims

Fit the 1×6 trims to the sides, front and back of the shed. Align the trims with attention and use 2″ brad nails to lock them into place tightly.

Fitting the roofing

Fitting the roofing

The next step of the woodworking project is to cover the roof with felt. As you can see in the image, you need to make sure the strips of roofing felt overlap at least 2”. In addition, you have to lock the tar paper to the plywood sheets with staples. Attach the asphalt shingles to the roof, making sure you follow the manufacturer’s instructions.

12x16 Lean to Shed Plans - Back view

12×16 Lean to Shed Plans – Back view

This lean to shed is beautiful and has a classical appeal. You can build this shed in any area, irrespective of you backyard’s style.

12x16 Lean to Shed Plans - Front view

12×16 Lean to Shed Plans – Front view

If you want to build the frame the 12×16 shed, you should check out PART 1 of the project. Check out PART 3 of the shed, where I show you how to build the double doors and attach the trims. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE. In addition, take a look over the rest of my DIY projects HERE.

 

 

Thank you for reading our project about free 12×16 lean to shed roof plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

 

<< Previous  |  Next >>

 




Related Posts

2 Comments

  1. Elizabeth
    • Jack Sander

Add Comment