10×16 Shed Doors and Trims Plans

This step by step woodworking project is about free 10×16 shed doors plans. This is PART 3 of the lean to shed project, where I show you how to build the double doors and the small door for the side wall. Don’t forget to take a look over the rest of the parts of the project, so you can learn how to build the roof and the frame of the shed. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE.

 

 

Made from this plan

Add-Image

 

 

10×16 Shed Doors and Trims Plans

Building a 10x16 shed

Building a 10×16 shed

Materials

  • N – 1 piece of 1×4 lumber – 79″ long, 2 pieces – 87 1/2″ long JAMBS
  • O – 2 pieces of T1-11 siding – 36″x87 1/2″ long, 2 pieces of 1×4 lumber – 36″ long, 2 pieces – 80 1/2″ long, 1 piece – 29″ long 2xDOOR
  • P – 2 pieces of 1×4 lumber – 39″ long, 1 piece – 80″ long JAMBS
  • R – 1 piece of T1-11 siding – 32″x80″ long, 2 pieces of 1×4 lumber – 32″ long, 2 pieces – 73″ long, 1 piece – 25″ long DOOR
  • Q – 2 pieces of 1×6 lumber – 213 1/4″ long, 2 pieces – 36″ long, 2 pieces – 43″ long TRIMS

Tools

 

 

Building the shed doors

Side roof trims

Side roof trims

Fit the 1×6 trims to the sides of the roof. Align the edges flush and insert 2″ brad nails to lock them into place tightly.

Building the double doors

Building the double doors

Build the double doors for front of the shed. Cut the panels from T1-11 siding and then attach the 1×4 trims. Align the edges flush and use 1 14/” screws or nails to assemble the doors.

Double door jambs

Double door jambs

Attach the 1×4 doors jambs around the large door opening. Use 2″ brad nails and glue to secure the jambs into place tightly.

Fitting the double doors

Fitting the double doors

Fit the double doors to the front opening and secure it into place with hinges. Install a latch and handles so you can close and open the doors easily.

Side door

Side door

Assemble the door for the side of the shed. Use the same techniques described above for the shed door.

Fitting the door jambs

Fitting the door jambs

Fit the 1×4 jambs around the small door opening. Use nails and glue to secure the jambs into place tightly.

Fitting the side door

Fitting the side door

Fit the shed doors into the opening and lock it into place with hinges. Install the latch and the handles, as well.

window trims

Window trims

Install the 3×3 PVC window to the opening. Fit 1×4 trims around the window opening. Align the trims with attention and lock them into place with 2″ brad nails.

10x16 Shed Plans - Front View

10×16 Shed Plans – Front View

Last but not least, you need to take care of the finishing touches. Fill the holes with wood putty and smooth the edges flush with sandpaper. Apply a few coats of paint or stain to enhance the look of the shed.

10x16 Shed Plans Free

10×16 Shed Plans Free

If you want to build the frame for this storage shed, you should check out PART 1 of the project. Make sure you take a look over PART 2 of the shed, to see how to build the lean to roof. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE. In addition, take a look over the rest of my DIY projects HERE.

 

 

Thank you for reading our project about 10×16 shed doors plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

 

<< Previous  |  Next >>

 




Related Posts

2 Comments

  1. Ken Lavigne
    • Jack Sander

Add Comment