Aldo Leopold Bench Plans

This step by step woodworking project is about aldo leopold bench plans. This bench is super simple to build, but surprisingly sturdy. If you like the design, make sure you follow the instructions so you get the job done by yourself. My plans come with step by step instructions and you can easily adjust all the dimensions to suit your needs. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans in the Shop.

 

 

Made from this plan

Add-Image

 

 

Aldo Leopold Bench Plans

Building a leopold bench

Building a leopold bench

 

Materials

  • A – 1 piece of 2×8 lumber – 37 1/4″ long LEGS
  • B – 1 pieces of 2×8 lumber – 22 1/4″ long LEGS
  • C – 1 piece of 2×10 lumber – 33″ long SEAT
  • D – 1 piece of 2×6 lumber – 36″ long BACKREST

Tools

Time

  • One Day

 

 

Building a leopold wood bench

Building the legs

Building the legs

First, you need to build the front legs for the aldo leopold bench. Mark the cut lines on the beams and get the job done with a circular saw. Smooth the cut edges with sandpaper for a professional result.

Building the back legs

Building the back legs

Build the back legs from 2×8 lumber, as well. Cut both ends of the beams at 60 degrees, by making 30 degree cuts with a miter saw. You can use any saw, as well, making sure you go with the blade along the cut lines.

Assembling the legs

Assembling the legs

Assemble the sides for the leopold bench. Align the edges with attention, add glue to the joints and drill pilot holes. In addition, insert 2 1/2″ screws to lock the legs together tightly.

Fitting the seat slat

Fitting the seat slat

Build the seat of the bench from 2×10 lumber. You can easily adjust the width of the bench to suit your needs. Drill pilot holes and inset 2 1/2″ screws into the side legs.

Attaching the backrest beam

Attaching the backrest beam

Build the backrest from 2×6 lumber. Align the edges flush, making sure the corners are right angled. Drill pilot holes through the backrest and insert 2 1/2″ screws into the legs.

Build a leopold bench

Build a leopold bench

Make sure you fill the holes and the dents with wood putty. Let it dry out for several hours and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of stain or paint over the components to enhance the look of the bench.

Leopold bench plans

Leopold bench plans

The aldo leopold bench is a classic design that is immortal. If you want to add unique appeal to your backyard or to your porch, make sure you make one of these. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE. In addition, take a look over the rest of my DIY projects HERE.

 

 

Thank you for reading our project about aldo leopold bench plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.




Related Posts

3 Comments

    • Jack Sander
  1. Matt

Add Comment