Building a Duck Blind Roof

This step by step woodworking project is about duck blind plans. This is PART 2 of the duck blind project, so you can get the job done in a professional manner. The front and back doors help you and your dog have an easy access to the shelter. The plans come with step by step instructions and you can easily adjust all the dimensions to suit your needs. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans in the Shop.

Made from this plan

How to build a duck blind roof

building-a-duck-blind

Materials

E – 2 pieces of 3/4″ plywood – 48″x49 1/2″ long WALLS
F – 2 pieces of 2×4 lumber – 96″ long, 4 pieces – 10 3/4″ long FRAME
G – 1 piece of 3/4″ plywood – 18″x96″ ROOF
H – 2 pieces of 2×2 lumber – 30″ long, 3 pieces – 42″ long, 1 piece of 3/4″ plywood – 45″x30″ long BACK DOOR
I – 2 pieces of 2×2 lumber – 14 1/4″ long, 2 pieces – 21″ long, 1 piece of 3/4″ plywood – 24″x14 1/4″ long FRONT WALL

3 pieces of 2×4 lumber – 8′
4 pieces of 2×2 lumber – 8′
2 pieces of 3/4″ plywood – 4’x8′
2 1/2″ screws, 1 1/4″ screws
hinges, latch
stain, glue, putty

Tools

Safety gloves, glasses
Miter saw, jigsaw
Chalk line, tape measure, spirit level, carpentry pencil
Drill machinery and drill bits

Time

One Day

Roof-frame

Start the PART 2 of the project by assembling the roof frame. Cut the components from 2×4 lumber. Drill pilot holes through the 96″ long components and insert 2 1/2″ screws into the perpendicular components.

Attaching-the-roof-frame

Attach the frame to the top of the back wall. Drill pilot holes through the frame and insert 2 1/2″ screws into the frame, after aligning the edges.

Fitting-the-roof

Attach a piece of 3/4″ plywood over the frame and secure it into place with 1 1/4″ screws.

Attaching-the-side-panels

Attach the 3/4″ plywood to the sides of the duck blinds.

Fitting-the-roof-support

Install a 2×4 vertically, that will support the roof frame.

Building-the-front-door

Build the front door from 2×2 lumber and from 3/4″ plywood. Use 2 1/2″ screws for the door frame and 3/4″ plywood for the door panel. Assemble everything together, making sure the corners are square.

Building-the-back-door

Build the back door in the same manner described above.

Fitting-the-back-door

Hang the back door to the back wall. Use hinges and a latch so you can secure the door into place tightly.

Fitting-the-front-door

Hang the front door to the front of the duck blind. Use hinges and a latch so you can secure it into place tightly.

Duck-blind-plans

This duck blind is compact enough so you can build it almost anywhere. Make sure you apply a few coats of camouflage paint over the components so you can protect the components from decay and to disguise it.

Diy-duck-blind-plans

This duck blind is the ideal project is you go for hunting and you need a shelter. You can easily adjust the size of the blind to suit your needs, while you use the same techniques described in the project. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Thank you for reading our project about duck blind roofing plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.

<< Previous | Next >>

PRINT PLAN