DIY King Size Platform Bed

I strongly encourage you to send photos with your projects built using my plans. Please send the materials at admin@howtospecialist.com or using the contact form. Any submission is highly appreciated by me and by the rest of the readers. In addition, your projects will be seen all around the world, so you can point out your skills. Don’t forget to mention the cost of the materials, the total time of the project as well as a few impressions about the build. 

 

 

DIY-Headboard

 

DIY-King-Size-Platform-Bed

 

Great website, it gave me a bunch of ideas. I started off by building the King Size Platform Bed. I used 2 x 10s Fir for the base, 2×4’s fir for the platform. I framed the platform sides with some 3/4” plywood (about 6” x 84”). I made the headboard with 1×6’s pine. I have about $300-$350 into it (lumber, screws, stain, rags, drop clothes, paint brushes, etc.). It took me about 30 hours to build, I took my time with it. I think the only thing I am missing is the LED lights for underneath the platform.

For stain, I used the color Old American. After I sanded it, I used the stain pre-treatment, then 2 coats of Old American Color Stain, then sealed with a satin finish sealer. The plans show the 2nd from top plank on the headboard, being cut to leave an opening. I decided not to do that, and just kept all of the planks whole. I learned that a 2×4 platform at 84” square wouldn’t fit through my bedroom door, so I had to modify it (i.e. cut it and reassembled it in the bedroom). Now I have to do some finishing touches, but that can wait.

By Mike Unser

 

 

Difficulty Level: Easy 

Estimated Cost: $350

Time required: One Week

From Plans: http://howtospecialist.com/finishes/furniture/platform-bed-frame-plans/

 




Related Posts

Add Comment