Corner entertainment center plans

This step by step diy woodworking project is about corner entertainment center plans. If you want to learn how to build a corner media center, we recommend you to pay attention to the instructions described in the article and to check out the related projects. There are many storage projects featured on our site, so don’t be afraid to browse through the rest of the woodworking plans.

Before starting the actual construction project, we recommend you to plan everything, as to save money and to keep the costs under control. Adjust the size and the design of the media center to suit your needs. In addition, we recommend you to invest in high-quality materials, such as pine, redwood or cedar, as they have a nice finish and are highly durable, especially in a humid environment.

It is essential to invest in high quality materials, that are also water-resistant, such as pressure-treated lumber. Cut the components at the right size by using a circular saw and smooth the cut edges with a sand block. Don’t forget to ask a skilled friend to assist you during the project, especially if you don’t have a large expertise in the field. You need someone to hold the components into place, while you drive the screws in.

 

Made from this plan

Add-Image

 

Corner entertainment center plans

Building a corner entertainment center

Building a corner entertainment center

 

Materials

  • A – 3 pieces of 3/4″ plywood – 15 3/4″x48″ long SHELVES 
  • B – 2 pieces of 3/4″ plywood – 15 3/4″x10″ long, 1 piece – 15 3/4″x24 1/2″ long PARTITIONS
  • C – 2 pieces of 1×6 lumber – 47 1/4″ long LEGS
  • D – 1 piece of 1/4″ plywood – 24 1/4″x42 1/2″ long, 2 pieces – 13″x42 1/2″ long BACK
  • E – 2 pieces of 1×2 lumber – 41 3/4″ long, 3 pieces – 46 1/2″ long TRIMS
  • F – 2 pieces of 1×3 lumber – 18″ long, 2 pieces – 28 1/2″ long, 1 piece of 1/4″ glass – 18 1/2″x24″ long 2xDOOR
  • G – 5 pieces of 1/4″ plywood – 51″ long TOP

 

Tools

  • Safety gloves, glasses, Miter saw, jigsaw
  • Chalk line, tape measure, spirit level, carpentry pencil
  • Drill machinery and drill bits

 

Tips

  • Use a good miter saw to make the angle cuts
  • Drill pilot holes before inserting the screws

Time

  • One Week

 

Related

 

 

Building an entertainment center

Building the storage shelves

Building the storage shelves

 

First of all, we recommend you to build the storage shelves for the corner entertainment center. Build the components out of 3/4″ plywood using the information from the diagram. Drill pocket holes at both ends of the horizontal components and secure them to the vertical partitions using 1 1/4″ screws. Add glue to the joints and make sure the corners are square.

 

Fitting the shelves

Fitting the shelves

 

Next, build the shelves for the media console. Mark the cut lines on the 3/4″ plywood sheet and get the job done using a circular saw. Smooth the edges with fine-grit sandpaper and remove the excess with a damp cloth. Align the edges with attention and drill pilot holes through the components before inserting 1 1/4″ finishing nails into the partitions. Add glue to the joints to enhance the rigidity of the structure.

 

Fitting the sides

Fitting the sides

 

Continue the project by fitting the 1×6 legs to the structure, as in the diagram. Drill pocket holes along the sides of the shelves and secure them to the legs by using 1 1/4′ screws and glue. Make sure the corners are square and leave no gaps between the components.

 

Fitting the legs

Fitting the legs

 

Next, fit the 1×2 legs to the back of the structure, as described in the diagram. Drill pilot holes and insert finishing nails into the structure. Make sure the corners are square and leave no gaps between the components.

 

Attaching the back

Attaching the back

 

Build the back of the media center out of 1/4″ plywood. Cut the sheets at the right size and secure them to the structure by using brad nails and glue. Leave no gaps between the components and remove the excess with a damp cloth.

 

Installing the baseboard

Installing the baseboard

 

Fit a 1×6 trim to the bottom of the corner media center. Use finishing nails and glue to lock the trim into place tightly.

 

Fitting the trims

Fitting the trims

 

Build the trims out of 1×2 lumber. Cut the components at the right size and secure them to the structure using 1 1/2″ finishing nails. Drill pocket holes at both ends of the horizontal trims and insert 1 1/4″ screws into the vertical components.

 

Building the door frames

Building the door frames

 

Build the doors for the corner media center out of 1×3 lumber. Cut the components at the right size and smooth the cut ends. Drill pocket holes at both ends of the horizontal components and insert 1 1/4″ screws into the vertical components. Add glue to the joints and use a router to make 1/4″ x 1/4″ rabbets on the interior face of the door, as described in the diagram.

 

Fitting the glass

Fitting the glass

 

Fit a piece of 1/4″ glass to the door and lock it into place using clips.

 

Fitting the doors

Fitting the doors

 

Fit the doors to the opening and secure them to the sides of the frame using appropriate hinges. Leave 1/8″ around the doors and check if they open and close easily. Fit handles to the doors, making sure the design matches the style of the rest of the furniture.

 

Attaching the tabletop

Attaching the tabletop

 

Build the tabletop out of 1×3 slats. Cut the slats at the right dimensions and fit them to the top of the structure. Use glue and finishing nails to lock the slats into place tightly.

 

Corner entertainment center plans

Corner entertainment center plans

 

Last but not least, we recommend you to take care of the finishing touches. Fill the holes with wood filler and let it to dry out for several hours. Check out the rest of the related woodworking projects in order to see the alternatives.

Smart Tip: Apply several coats of stain or paint to the wooden components, if you want to protect them from decay and to enhance the look of the corner media center plans.

 

 

Thank you for reading our project about corner entertainment center plans and we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends and LIKE us, by using the social media widgets. SUBSCRIBE if you want to be the first that gets our latest articles.




Related Posts

2 Comments

  1. Jeff
  2. Warren

Add Comment

Leave a Reply to Warren Cancel reply