6ft Farmhouse Table – Free DIY Plans

This step by step woodworking project is about wooden diy 6 feet wood farmhouse bench plans. If you want to make a sturdy farmhouse table with a rustic look, this X-shaped leg project might be right for your needs. This wood bench seat is easy to build but it features a neat design. See my other DIY projects HERE.

We recommend you to invest in the best materials you could afford. Therefore, you should buy weather-resistant lumber, such as pine or cedar. Always take accurate measurements before adjusting the size of the components at the proper size. Drill pilot holes trough the components before inserting the wood screws, to prevent the wood from splitting. See all my Premium Plans HERE.

 

 

Made from this plan

DIY-Farmhouse-Table Build-a-farmhouse-tableDIY-FarmhouseHow-to-build-a-farmhouse-tableFarmhouse-Table-Plans  Add-Image

 

 

6ft Farmhouse Table – Free DIY Plans

Building a farmhouse table

Building a farmhouse table

 

Materials

  • A – 4 piece of 4×4 lumber – 32 1/4″ long, 2 pieces of 4×6 lumber – 22″ long BASE
  • B – 8 piece of 4×4 lumber – 14 1/4″ long BRACES
  • C – 2 piece of 2×4 lumber – 68″ long, 1 piece – 15 1/4″ long SUPPORTS
  • D – 1 piece of 2×4 lumber – 45″ long, 2 pieces – 2″ long STERTCHER
  • E – 5 pieces of 2×8 lumber – 57 1/2″ long, 2 pieces of 2×8 lumber – 36 1/4″ long TABLETOP

Tools

Time

  • One Day

 

 

How to build a farmhouse bench

Building the bases

Building the bases

The first step of the project is to build the base for the farmhouse table. Use 4×4 lumber for the components, as show in the diagram. Use a saw to make the angle cuts to the both ends of the beams, for a decorative look. Moreover, you need to make notches to the top supports, so you can fit the 2×4 supports that will hold the tabletop. Use a circular saw to make parallel cuts inside the marked areas and then remove the excess with a chisel.

Assembling the side frames

Assembling the side frames

The next step of the project is to assemble the side frames. Use 4×6 lumber for the vertical supports. Drill pocket holes at both ends of the support, on both sides. Insert 2 1/2″ screws and add glue to the joints to lock everything together tightly. Make sure the edges are flush and add glue to the joints.

Fitting the x shaped braces

Fitting the x shaped braces

Use 4×4 lumber for the X-shaped braces. Use a saw to make the 45 degree cuts to both ends of the braces. Align the edges with attention, drill pilot holes and insert 3 1/2″ screws to lock them into place tightly.

Fitting the tabletop supports

Fitting the tabletop supports

Use 2×4 lumber for the top supports. Use a saw to make a 45 degree bevel cut to both ends of the supports. Center the supports into place and then secure them to the 4×4 supports with 3 1/2″ screws. Use 2×4 lumber for the support that hold the long supports together. Drill pocket holes at both ends of the 15 1/4″ slat and then secure it to the supports with 2 1/2″ screws.

Building the tabletop

Building the tabletop

Use 2×8 lumber for the tabletop components. Drill pocket holes through the slats, as shown in the diagram. Add glue to the joints and then insert the 2 1/2″ screws.

Fitting the tabletop

Fitting the tabletop

Center the frame of the table to the top. Drill pilot holes through the stretcher and supports, and then insert 2 1/2″ screws.

Fitting the stretcher

Fitting the stretcher

Use 2×4 lumber for the stretcher. Drill pocket holes at both ends of the beam and then secure it to the side frames with 2 1/2″ screws. Center the stretcher into place and make sure the corners are square.

Fitting the decorative stretcher pieces

Fitting the decorative stretcher pieces

Attach decorative 2×4 pieces to the exterior of the table, as shown in the diagram. Use glue to lock the decorative pieces into place.

6ft Farmhouse Table Plans Free

6ft Farmhouse Table Plans Free

Fill the holes with putty and then smooth the surface with 120-220 grit sandpaper. Apply a few coats of paint or stain to enhance the look of the table. See the matching bench plans here.

6ft Farmhouse Table Plans

6ft Farmhouse Table Plans

Make sure you take a look over all my table plans HERE. I have a lot of free woodworking projects on my site so you can choose from. If you like my project, don’t forget to SHARE it on Facebook and Pinterest.

Smart Tip: Don’t forget to share your projects with me, as I love seeing what you guys are working on. Send me the pics HERE. In addition, take a look over the rest of my DIY projects HERE.

 

 

Thank you for reading our project about 6ft farmhouse table plans and I recommend you to check out the rest of the projects. Don’t forget to LIKE and SHARE our projects with your friends, by using the social media widgets. SUBSCRIBE to be the first that gets our latest projects.




Related Posts

13 Comments

  1. Jason Ciehoski
  2. Fakhreddin
  3. Dan Broersma
    • Jack Sander
  4. Bobby Sims
    • Jack Sander
  5. Brad Griffin
    • Jack Sander
    • Paul
  6. Sandy

Add Comment